GRACO 262818 - Hydr Viscount Ii Motor Kit, 1800 PSI (12 MPa, 124 Bar)

Specifications

• Max Working Pressure: 1800 psi (12 MPa, 124 bar)
• Series Square: B
• Series Cylindrical: C
• Tie Rod Diameter: 8-in.
• Recommended Hydraulic Oil Operating Temperature: 80 - 160°F (27 - 71°C)
• Maximum Temperature Warning: 180°F (82°C)

Compatible Equipment

• XP Sprayer
• Xtreme Sprayer
• NXT 6500 NXT Air Motor

Related Parts

• 217022 - Motor, Gh-733, 1500 PSI (10 MPa, 103 Bar)
• 217338 - Hydraulic Motor, 1500 PSI (10 MPa, 103 Bar)
• 235345 - Viscount Ii Hydraulic Motor, 1500 PSI (10 MPa, 103 Bar)
• 24W139 - Motor, Hydr, Visc Ii, Hydra-Clean, 1900 PSI
• 222011 - ground wire and clamp

Available in both square and cylindrical housing configurations. Interchanges with NXT 6500 NXT Air Motor and 8-in. tie rod diameter lowers. Maximum hydraulic fluid input pressure is 1800 psi. This motor kit is grouped with models 235435 and 24W139 for hydraulic oil operating temperature specifications. The motor seals will wear faster and leakage may occur if operated at higher oil temperatures. If hydraulic oil temperature approaches 180°F (82°C), the hydraulic fluid supply cooling system, filters, etc. should be checked and cleaned or repaired as needed. Part 262818 is listed as a model that requires grounding with ground wire and clamp part number 222011. No detailed specifications provided on this page.

Reference Manuals

• 307158 (Page 2) Viscount® II Hydraulic Motor
• 3A0420 (Page 77) XP and XP-h Proportioners