GRACO 26C062 - Waste Oil Evacuation System w/ 24 gal Steel Tank, Suction Probes & Adapters, 7 PSI
Waste Oil Evacuation System model (tank-based system for emptying operations)
For shops requiring flexibility when it comes to removing used fluids, use Graco's vacuum-assisted evacuation system.
Vacuum Gauge - Ensure peak performance with easy-to-read vacuum gauge.
Easy to Drain - Pressurize using shop air for easy oil evacuation.
Vacuum Probes - Variety of flexible suction attachments and adapters included.
Large 24 Gallon (90 Liter) Capacity Receiver - Perfect for small to large shops without an evacuation system.
Additional Specifications
- Max Working Pressure: Maximum Draining Pressure: 7 PSI (50 kPa, 0.5 bar); Maximum Air Inlet Pressure to Vacuum: 110 PSI (760 kPa, 7.6 bar)
- Capacity: 24-Gallon (90 Liter)
- Application: Pressurized oil drain for collection of used lubricants
- Max Fluid Temperature: 194°F (90°C)
- Compatible Fluids: Do not use with grain alcohol, gasoline, engine cleaning agents, antifreeze, or brake fluid
- Valve Reference: Fig. 2, page 4 for valve locations
- Operation Type: Tank emptying model
| Compatible Fluid | Used Oil;ATF |
| Maximum Operating Temperature (°F) | 194 |
| Minimum Operating Temperature (°F) | 30 |
| Overall Length (in) | 24 |
| Overall Width (in) | 16 |
| Tank Capacity (gal) | 24 |
| Type | Fluid Reclamation Package |
| Weight (lb) | 60.8 |
| Wetted Parts | Steel, Copper, PVC Plastic, Rubber, Aluminum |
Compatible Equipment
- Oil Ace system
- Model 26C064, 26C064 (similar operating procedure)
Related Parts
- 119577 - Series A Oil Receiver
- 26C061 - Waste Oil Evacuator
- 26C063 - Waste Oil Evacuator with Bowl
- 26C064 - Waste Oil Evacuator with Chamber and Bowl
- 26C064
- 26C061
- 26C063
For professional use only. Part of the Oil Ace product line. Instructions specify to close all valves (a, b, d, and e) for Model 26C062, while Model 26C064 requires closing valves (a, b, c, d, and e). Both models use the same handle (15) operation positions for chamber control. Part of a series of waste oil evacuation systems. Requires drain tube (7a) to be fully extended for proper pressurization during emptying. Uses ball valve (c) on drain tube and ball valve (e) at discharge hose connection during operation.
Reference Manuals
