Rust-Oleum 278380 278380 Silver SpraySmart Marking Paint (non-aerosol)
Features and Benefits:
Custom design allows for quick color changes
Transparent package lets you see the color and how much paint is left
Empty pouch can be disposed of with regular trash
Each pouch marks more linear feet than the leading competitor
Non-clogging paint tip
For Best Results: Massage the paint pouch for 30-60 seconds prior to use
Size: 10.5 fl ounces
Color: Silver
Specifications:
Surface Preparation:
All Surfaces: Remove loose contaminants by sweeping the surface before application of the coating
Application:
Fully charge the device. It can take 4-6 hours to fully charge the battery when using the line voltage charger. The control panel on the bottom of the device will display the level of battery change and indicator lights to show when it is ready for use. A fully charged battery will spray up to 48 pouches. On board electronics self monitor the device and maintains constant spray pressure. Open the device by unscrewing the black collar ring and removing the top assembly. Massage paint pouch for 10 seconds and shake for 20 seconds before every use; then remove the valve cap on the paint pouch. Hold the paint pouch upright by the bottom of the valve housing. Place the top assembly over the valve. Holding the clear inner ring of the top assembly, twist clockwise to attache it to the paint pouch. Insert pouch into the device and secure the top assembly by screwing down the black collar ring onto the body of the device until tight. Insert the device into the marking wand and power on the unit. Hold unit 4-6 inches from surface and trigger to begin spraying. When finished shut off the device and depressurize by pressing the button on the side of the top assemble. Partially used paint pouches can be saved for future use. Replace the valve cap.
