GRACO 77X543 - Dyna-Star Accessories HF Manifold w/ 4, 000 PSI Pressure Relief, 3/8", Zinc Plated Steel, 3/8" NPT(F)
Dyna Star HF Outlet Adapter Kit rated 4000 PSI (27.58 MPa, 275.8 bar)
Additional Specifications
- Thread: 3/8 in. NPT(F)
- Max Working Pressure: 4000 PSI (27.58 MPa, 275.8 bar)
- Material: Zinc plated steel, FKM
- Inlet Size: 3/8 in. NPT(F)
- Outlet Size: 3/8 in. NPT(F)
- Pressure Relief Factory Set: 4000 PSI ± 250 PSI (275.8 bar, 27.58 MPa ± 10%)
- Pressure Relief Reset: 80% of set pressure
- Relief Rate: 0.13 gallons/minute @ 4000 PSI (0.5 liters/minute @ 24.1 MPa, 241 bar)
| For Use With | Dyna-Star HF and HP Pumps |
| Includes | Outlet Adapter, Pipe Plug, Pressure Relief Valve, Hardware |
| Kit Type | Fittings Kit |
Compatible Equipment
- Series Progressive system
- Injector based systems being converted to Series Progressive system
- Dyna-Star HP or HF Pump
Related Parts
Kit Contents
- ADAPTER, outlet
- PLUG, pipe
- SCREW, cap (3)
- O-RING, 014 FKM, A-7 (2)
- VALVE, pressure relief
- CAP, plug
The pump outlet requires modification to convert an Injector based system to Series Progressive system. Contact GRACO Customer Service or your local GRACO distributor to identify the correct kit for the installation location. Used with the Dyna-Star HP or HF Pump to convert an injector-based system to a series progressive system. For professional use only. Flow capability depends on viscosity, type of fluid, temperature, etc. HP models have higher pressure rating of 5000 PSI (344.7 bar, 34.47 MPa)
Reference Manuals
- 332540 (Page 8) Dyna-Star HP Pump System
- 333392 (Page 1) Dyna-Star HF and HP Outlet Adapter Kit
