GRACO 96G325 - G3 Standard Grease Lubrication Pump, 12 VDC, 2L, Low Level Relay, CPC
The Graco G3 Standard is an electric automatic lubrication pump that delivers metered shots of lubricant to multiple points on a programmed schedule. With no onboard controller, it runs from your existing machine control or PLC for a low-cost way to automate lubrication.
Key Features
- No onboard controller — the pump runs from your existing machine control or PLC, keeping system cost low while automating lubrication, and sends a low-level relay signal to that external controller
- One adjustable pump element included, expandable to three outlets; output per outlet is set with volume-control spacers
- Flexible design works with both injector-based and series progressive (divider-valve) lubrication systems
- Dispenses NLGI #000 to #2 grease
- Built to perform in harsh, high-wear environments across a wide temperature range
Specifications
| Series | G3 Standard |
| Lubricant | Grease (NLGI #000 to #2) |
| Reservoir Capacity | 2L |
| Input Voltage | 12 VDC |
| Reservoir Type | Standard |
| Low-Level Monitoring | Low-level relay output |
| Power Connector | CPC |
| Pump Elements | 1 adjustable element included (3 maximum) |
| System Compatibility | Injector-based and series progressive |
| Graco Model Code | G-12NC-2L0A07-L0C00000 |
Installation Notes
A pressure relief valve (Graco 16C807) is required at each pump outlet and is sold separately. DC models require a user-supplied fuse sized to the input voltage (fuse kits available from Graco). Mount the pump upright.