GRACO A24607 Python® XL-DA25 Pneumatic Chemical Injection Pump, 6 in Air Motor, 3/4 in Chromex Coated Plunger, FFKM Seals, ATEX Approved
The Python XL-DA25 is a product line extension to the current Python XL-DA product family so it uses the same double acting technology and can achieve nearly double the flow rate of a similar single acting pump. The Python XL-DA25 comes with a 2.5" pump stroke covering a wide range of flow rates. These pumps operate on low gas or compressed air pressures and utilize the same Merkur® air motor used on other Graco products. The wetted parts are all 316 stainless steel and the air motor come with a Graco proprietary coating suitable for off-shore applications.
- Double Acting
- Pumps fluid in both directions of the stroke for increased flows
- Provides continuous flow operation for better pump efficiencies
- 2.5 inch pump stroke for high flow rates
- Self Priming
- Anti-locking so air cannot get trapped inside air motor and stall pump
- Pump can free itself of air and resume pumping without any adjustments
- Ease of Serviceability
- Simple pump design for quick seals replacement
- Pumps are installed vertically for a reduced footprint •Minimum number of tools required
- Environmentally friendly
- Gas recovery kit avaiable for zero emissions!
- Recoverable exhaust gas with kit
- Less fugitive emissions
Specifications:
| Air Inlet Size (in) | 3/4 |
| Air Inlet Thread Gender | Male |
| Air Inlet Thread Type | NPT |
| Air Motor Size (in) | 6 |
| Approvals | ATEX |
| Fluid Inlet Type | NPT |
| Fluid Outlet Size (in) | 1/4 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NF4 |
| Maximum Cycle Rate (CPM) | 60 |
| Maximum Flow Rate (GPD) | 930 |
| Maximum Working Pressure (MPa) | 44.1 |
| Maximum Working Pressure (psi) | 6400 |
| Minimum Air Inlet Pressure (psi) | 15 |
| Minimum Flow Rate (GPM) | 180 |
| Plunger Rod Coating | Chromex |
| Plunger Size (in) | 3/4 |
| Type | Pneumatic Piston Pump |
| Weight (lb) | 57.4200 |
