GRACO A30061 - Wolverine Drive Module 230V 1/5 HP Motor Duplex 1/4 3/8 1/2 Plunger Sizes
Wolverine Drive Module designed for 230 VAC operation with 1/5 HP motor in duplex configuration. This no cycle count module provides reliable automated pumping for duplex systems using 1/4 in, 3/8 in and 1/2 in plunger sizes, offering consistent performance without cycle limitations.
Wolverine hazardous location chemical injection pumps are designed for injecting chemicals at well sites and pipelines. Explosion proof motors are an integral part of the Hazardous location pumps designed to operate in applications requiring Class 1, Division 1 rated products.
- Easily integrated with Graco chemical injection solar powered systems.
- Wolverine pumps reduce emissions to the atmosphere and have a greater level of control when used with our injection rate controllers.
- Our injection pumps are designed for up to two years of operation before simple repairs.
- Each pump features an adjustable fluid packing that lasts up to 25 times longer than non-adjustable seals.
- All Wolverine pumps have 316 SST wetted parts, plus they are resistant against water and dust.
- The AC and DC operated motors are rated for use in Division 1 Hazardous (Classified) Locations.
- Flow rates up to 320 gpd (1,211 lpd) and a pressure rating up to 10,000 PSI (686 bar, 68.9 MPa).
- Long lasting seals can easily be replaced in less than ten minutes, on location.
- Precision stroke adjustment between 1/2 in to 1 in ensures accurate injection rates.
- HNBR, FKN, FKM ETP, and FFKM plunger packings and check valve seals can handle some of the most aggressive chemicals.
Additional Specifications
- Motor Hp: 1/5 HP
- Configuration: Duplex
- Cycle Count: No Cycle Count
- Plunger Sizes: 1/4 in, 3/8 in, 1/2 in
- Motor Size: Large Motor (Advanced)
- Side 1 Ratio: 25:38:50
- Side 2 Ratio: 25:38:50
- Location Rating: Hazardous Location (C1 D1), ATEX, and Continuous Injection (C1 D2)
| Input Voltage (V ac) | 230 |
| Power Rating (HP) | 0.25 |
| Type | Drive Module |
Features
- 230 VAC operation for industrial applications
- 1/5 HP motor for reliable power
- Duplex configuration for continuous operation
- No cycle count limitation
- Compatible with multiple plunger sizes
Applications
- Industrial pumping systems
- Automated fluid dispensing
- Continuous duty applications
- Duplex pump operations
Compatible Equipment
- Wolverine pump systems
- Duplex pumps with 1/4 in, 3/8 in and 1/2 in plunger sizes
- Wolverine Advanced pump systems
Related Parts
- A30060 - Simplex (50) No Cycle Count
- A30062 - Duplex (57) No Cycle Count
- A30063 - Simplex (70) No Cycle Count
- A30064 - Duplex (75) No Cycle Count
- A30065 - Duplex (77) No Cycle Count
Part of the Wolverine Drive Module family. The (55) designation indicates this is used for duplex pumps with 1/4 in, 3/8 in and 1/2 in plunger sizes as noted in the footnotes. This is a drive module kit for hazardous location, ATEX, and continuous injection applications. Part of the Large Motor (Advanced) family with various voltage and configuration options available.
Reference Manuals
