GRACO D53315 Husky 716 AL Standard Pump, PP Center Section, SS Seats, PTFE Balls & TPE Diaphragm
The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.
- Center- and end-porting
- No mechanical seals which causes fluid leaks or failures
- Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
- Easy-to-service air valve and ball checks
- 3/4 in (19.05 mm) center- and end-porting
- No seals to leak or fail
- Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
- Easy-to-service air valve and ball checks
Specifications:
Air Exhaust Port Size (in) | 3/8 |
Air Exhaust Port Thread Gender | Female |
Air Exhaust Port Thread Type | NPT |
Air Inlet Size (in) | 1/4 |
Air Inlet Thread Gender | Female |
Air Inlet Thread Type | NPT |
Application | Industrial |
Ball Material | PTFE |
Center Section Material | Polypropylene |
Compatible Material | Antifreeze, Detergents, Motor Oil, Grease & Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Treatment, Water, Ink |
Connection Type | Threaded |
Diaphragm Material | TPE |
Fluid Inlet Size (in) | 3/4 |
Fluid Inlet Thread Gender | Female |
Fluid Inlet Thread Type | NPT |
Fluid Outlet Size (in) | 3/4 |
Fluid Outlet Thread Gender | Female |
Fluid Outlet Thread Type | NPT |
Fluid Section Material | Aluminum |
Manifold Configuration | Center Port |
Manifold O-Ring Material | PTFE |
Material | Aluminum |
Maximum Air Consumption (SCFM) | 28 |
Maximum Air Pressure (MPa) | 0.7 |
Maximum Air Pressure (psi) | 100 |
Maximum Cycle Rate (CPM) | 400 |
Maximum Flow Rate (GPM) | 16 |
Maximum Fluid Pressure (MPa) | 0.7 |
Maximum Fluid Pressure (psi) | 100 |
Maximum Operating Temperature (°F) | 225 |
Maximum Solid Size (in) | 0.09375 |
Minimum Operating Temperature (°F) | 40 |
Overall Height (in) | 10.43 |
Power Source | Air |
Seat Material | Stainless Steel |
Standards Met | ATEX, CE |
Type | Pneumatic Diaphragm Pump |
Weight (lb) | 8.5 |