GRACO DF3666 - Husky 2150 AL AODD Metal Pump w/ NPT Standard Air Valve, SP Seat, SP Ball, & SP Diaphragm
The Husky 2-inch pneumatic positive displacement double diaphragm pumps offer larger ports for increased flow, along with a patented, high-reliability closed center air valve that is online serviceable. AODD pumps with a 2 inch (50.8 mm) connection available in polypropylene, aluminum, SST and iron. Pumps below are quoted with standard aluminum center sections, more corrosion resistant stainless steel center sections are also available upon request.
Features:
- 2" (51 mm) ANSI end-porting
- Fluid flow up to 150 gpm (568 lpm)
- Fluid pressure to 120 psi (8.4 bar, 0.84 MPa)
- Lube-free operation
- Epoxy-coated air section for tough environmental conditions
The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.
- Center- and end-porting
- No mechanical seals which causes fluid leaks or failures
- Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
- Easy-to-service air valve and ball checks
- 3/4 in (19.05 mm) center- and end-porting
- No seals to leak or fail
- Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
- Easy-to-service air valve and ball checks
Specifications:
| Air Inlet Size (in) |
1/2 |
| Air Inlet Thread Gender |
Female |
| Air Inlet Thread Type |
NPT |
| Application |
Industrial |
| Ball Material |
Santoprene |
| Center Section Material |
Aluminum |
| Compatible Material |
Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Water - Wastewater Transfer |
| Connection Type |
Threaded |
| Diaphragm Compatible Material |
Santoprene |
| Diaphragm Material |
Santoprene |
| Fluid Inlet Size (in) |
2 |
| Fluid Inlet Thread Gender |
Female |
| Fluid Inlet Thread Type |
NPT |
| Fluid Outlet Size (in) |
2 |
| Fluid Outlet Thread Gender |
Female |
| Fluid Outlet Thread Type |
NPT |
| Fluid Section Material |
Aluminum |
| Manifold Configuration |
End Port |
| Manifold O-Ring Material |
PTFE |
| Material |
Aluminum |
| Maximum Air Consumption (SCFM) |
175 |
| Maximum Air Pressure (MPa) |
0.827 |
| Maximum Air Pressure (psi) |
120 |
| Maximum Cycle Rate (CPM) |
145 |
| Maximum Flow Rate (GPM) |
150 |
| Maximum Fluid Pressure (MPa) |
0.827 |
| Maximum Fluid Pressure (psi) |
120 |
| Maximum Operating Temperature (°F) |
150 |
| Maximum Solid Size (in) |
0.25 |
| Model |
Husky |
| Power Source |
Air |
| Seat Material |
Santoprene |
| Series |
2150 |
| Standards Met |
ATEX, CE |
| Type |
Pneumatic Diaphragm Pump |
