GRACO V25GB060BB - iQ Dispense Valve, Ball/Seat, Heated, 0.067in (1.7mm) Tip, 2.36in (60mm) Nozzle, Direct Mount Solenoid
The iQ Ball and Seat Dispense Valve offers high reliability for single component sealant and adhesive dispensing applications.
| Air Inlet Size (in) | 5/16 |
| Air Inlet Thread Type | Push-to-Connect |
| Ambient/Warm Melt/Hot Melt | Warm Melt |
| Applicator Type | Ball/Seat |
| Component Type | Single Component |
| Fluid Inlet Size (in) | 1/4 |
| Fluid Inlet Thread Gender | Female |
| Fluid Inlet Thread Type | NPT |
| Gun Activation | Automatic |
| Maximum Air Pressure (MPa) | 0.83 |
| Maximum Air Pressure (psi) | 120 |
| Maximum Fluid Pressure (MPa) | 28 |
| Maximum Fluid Pressure (psi) | 4000 |
| Maximum Operating Temperature (°F) | 158 |
| Mount Location | Direct Mount Solenoid |
| Nozzle Size (in) | 0.067 |
| Outlet Block Length (in) | 2.4 |
| Phase | 1 |
| Power Rating (W) | 75 |
| RTD Type | 100 OHM - Platinum |
| Solenoid Valve Voltage Rating (V dc) | 24 |
| Type | Dispense Valve |
| Voltage (V ac) | 240 |
| Weight (lb) | 2.2 |
| Wetted Material | Aluminum, UHMWPE, 17-4 Stainless Steel, PEEK, Chemical Resistant O-Rings, Silicone Nitride, CA 360 Brass, Coated Tool Steel, C2 Carbide with Cobalt Binder |
