ITW 1007000 - #12-24 x 1-1/4'' Tek5 Steel-to-Steel Self-Drilling Screws Bonded Washer, Climaseal, 2500ct

Features:

• Teks Drill Point
• Non-walking, cutting edges, pigtail reduction
• Engages material faster, drills with less effort, safer installation

• Heavy Duty load bearing area
• Attaches up to 7.2" of material including 1/2" steel

• Climaseal®
• Coating provides long life protection
• Fewer replacements

• Integrated Drill Point & Tapping Threads
• Quick transition from drilling to tapping
• Lower installation torque
• Unique double fluted point has precise cutting edges to improve drill performance in 1/4” thru 1/2’’ steel.
• Engineered for fast drilling and smooth tapping with less effort.
• 1/4 Diameter has notched threads to reduce tapping torque.

Applications:

• Metal deck, clips, liner panels or accessories to structural steel or bar joist; Longer fasteners can be used in retrofit clip and sheet applications

Installation:

• A standard screwgun with a depth sensitive nosepiece should be used to install Teks. For optimal fastener performance, the screwgun should be a minimum of 6 amps and have an RPM range of 0-2500. (Maximum 1800 RPM is recommended for Teks 5 fasteners).
• Adjust the screwgun nosepiece to properly seat the fastener.
• New magnetic sockets must be correctly set before use. Remove chip build-up as needed.
• The fastener is fully seated when the head is flush with the work surface.
• Overdriving may result in torsional failure of the fastener or stripout of the substrate.
• The fastener must penetrate beyond the metal structure a minimum of 3 pitches of thread.

Specifications: