Jet 311442 EVS-1440 Electronic Variable Speed lathe with Collet Closer, 3HP
The EVS-1440B is engineered to maximize your shop’s output. The D1 4 Spindle is precision ground for accuracy and supported by class 7 tapered roller bearings capable of a run out maximum of .0004’’. The 2 speed gearbox allows operators to easily work at low speeds from 40 to 365 RPM and at high speeds from 220 to 2,000 RPMs

Features:

V-way bed design is induction hardened and ground
Splined, not keyed, shafts are utilized
D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings
Independent leadscrew and feed rod
Adjustable gibs are incorporated in the carriage and slideways
Class 7 precision taper roller bearings keep spindle run out to a maximum of 0.0004"
Meehanite castings retain their tolerance and remain rigid through many years of machining
Safety on/off switch
Emergency Stop within easy reach of the Operator
Electronic Chuck Key Docking Station
Chuck Guard
Foot Brake
Two speed gearbox allows low speeds from 40-365 RPM to high speeds from 220-2000 RPM
LED RPM readout allows for precise turning speeds
Spindle actuation control is apron mounted
Gap bed section provided for larger diameter work
Compound and cross slide have backlash elimination
Tailstock may be offset for turning tapers and includes an inch-metric graduated quill
Front removable chip tray
Spindle jog button for easy gear engagement and spindle inching
Coolant system
Integrated locking tool storage cabinet in the stand
Full length splash guard
Standard Accessories
6" 3-Jaw Chuck
Treading Dial Indicator
Coolant Pump
Steady & Follow Rest
Metric Change Gears
LED Work Lamp

Specifications

Accessory 1	Collet Closer
Swing Over Bed (In.)	14
Swing Over Cross Slide (In.)	9-1/16
Swing Through Gap (In.)	19- 1/2
Length of Gap (In.)	9-1/2
Distance Between Centers (In.)	40
Spindle Bore (In.)	1-1/2
Spindle Mount	D1-4
Number of Spindle Speeds	Variable
Range of Spindle Speeds (RPM)	40-2000
Spindle Taper with Sleeve	MT-5
Number of Longitudinal and Cross Feed Rates	25
Range of Longitudinal Feeds (IPR)	0.0016-0.0460
Range of Cross Feeds (IPR)	25
Number of Inch Threads	34
Range of Inch Threads (TPI)	2-56
Number of Metric Threads	34
Range of Metric Threads	0.5-12
Max Tool Size (In.)	3/4 x 3/4
Compound Slide Travel (In.)	3-1/2
Cross Slide Travel (In.)	7
Tailstock Spindle Travel (In.)	6-1/8
Taper in Tailstock Spindle	MT-3
Follow Rest Capacity (In.)	0.35 - 2.2 Cooper Shaft (standard ) 0.393 - 2 Bearing Roller(OP)
Steady Rest Capacity (In.)	0.23-0.61 Copper Shaft ( Standard) 0.20-2.36 Bearing Roller(OP)
Width of Bed (In.)	7.48
Motor (HP)	3HP, 230/460V, 3Ph
Overall Dimensions (L x W x H) (In.)	68.5 x 28.3 x 50
Shipping Dimensions (L x W x H) (In.)	76 x 30 x 61
Net Weight (Lbs.)	1320
Gross Weight (Lbs)	1584
Height	50.0000
Length	68.5000
Weight	1584.0000
Width	28.3000