JET 756121 PH-24T, 24" Planishing HammerJET’s 24" Planishing Hammer has a quick change set up on the upper dies and a deep throat that works to the middle of most panels. The head with 3-speed regulator is capable of 4,400 – 4,800 / 3,200 – 3,500 / 1,800 – 2,000 blows-per minute (BPM). Easy to-reach, adjustable flow control valve allows the user to deliver the proper BPM needed for any job. Operates on standard shop air.
Features:
Smooths beads and forms mild steel sheet metal up to 16 Gauge
Smooths beads and forms aluminum and copper up to 1/8 in. thick
Machine supplied with a pair of upper and anvil dies
3-Position airflow regulates speeds of pneumatic hammer
Machine controlled with 110V AC foot control
2-Die Set Brackets
Quick change of upper dies
Retractable handle makes machine easy to move around the shop
Wider base support to prevent movement of machine while in use
Specifications| Frame Tube Sizes (In.) | 4 x 4 |
| Throat (In.) | 24 |
| Head Opening (In.) | 2-1/2 |
| Maximum Pressure (PSI) | 90 |
| Air Consumption (CFM) | 8.8 |
| 3-Speed Regulator (Hits Per Min.) | 4,400 - 4,800 / 3,200 - 3,500 / 1,800 - 2,000 |
| Noise Level (DB) | 93 - 105 |
| Overall Dimensions (L x W xH) (In.) | 34 x 30 x 61 |
| Weight (Lbs.) | 220 |
| Width | 30.0000 |
| Weight | 250.0000 |
| Height | 61.0000 |
| Length | 33.5000 |
