Midland Industries 02683-06 Bulkhead Tank Union, 3/8" Flareless x 3/8" Flareless, Brass

Item #: 02683-06-MIDLAND

Price: $7.55

Essential Accessories

SKU: 02683-06
Connection Size 1	3/8 in
Connection Size 2	3/8 in
Connection Type	Flareless Tube\|Flareless Tube
Connection Type 1	Flareless
Connection Type 2	Flareless
Fitting Type	Union
Material	Brass
Material Construction	Brass

SKU: 02683-06

Connection Size 1

3/8 in

Connection Size 2

3/8 in

Connection Type

Flareless Tube|Flareless Tube

Connection Type 1

Flareless

Connection Type 2

Flareless

Fitting Type

Union

Material

Brass

Material Construction

Brass

Characteristic	Description
Typical Application	Pneumatic instrumentation circuits, lubricant and cooling lines.
Working Pressure and Temperature Ranges	Up to 150 PSI from 0°F to +150°F with thermoplastic tubing. Up to 300 PSI from 0°F to +175°F with soft metal tubing.
Maximum allowable metal tube wall thickness for use with Poly-Tite fittings	1/8", 3/16" O.D.: no limitation 1/4" O.D.: .035 5/16", 3/8", 1/2" O.D.: .049
Vibration	Excellent Resistance.
Temperature Range	-65°F to +250°F (-53°C to +121°C) with brass sleeve -40°F to +150°F (-40°C to +66°C) with plastic sleeve (Refer to tubing temperature range.)
Used With	Aluminum & copper tubing. Hard plastic tubing requires brass sleeve. Not recommended for steel tubing.
Tolerance	+/- .02 on all dimensions. Dimension data can change without notice. Please call when dimensions are critical.
Advantages	No flaring of tubing required Easy installation, captive sleeve, pre-assembled for installation and can be reassembled Nuts rotate around the sleeve during tightening, preventing twisting of tubing
Assembly Instructions	Cut tubing to desired length. Slide nut/sleeve assembly on tube. Threaded end "A" of nut must face toward fitting. Bottom tubing into fitting. Plastic sleeve: Tighten nut hand tight. Brass Sleeve: Tighten nut hand tight, then an additional 3/4 turn. *Note: 1/8 and 3/16 sizes have brass sleeves

Characteristic

Description

Typical Application

Pneumatic instrumentation circuits, lubricant and cooling lines.

Working Pressure and Temperature Ranges

Up to 150 PSI from 0°F to +150°F with thermoplastic tubing.
Up to 300 PSI from 0°F to +175°F with soft metal tubing.

Maximum allowable metal tube wall thickness for use with Poly-Tite fittings

1/8", 3/16" O.D.: no limitation
1/4" O.D.: .035
5/16", 3/8", 1/2" O.D.: .049

Vibration

Excellent Resistance.

Temperature Range

-65°F to +250°F (-53°C to +121°C) with brass sleeve
-40°F to +150°F (-40°C to +66°C) with plastic sleeve

(Refer to tubing temperature range.)

Used With

Aluminum & copper tubing. Hard plastic tubing requires brass sleeve. Not recommended for steel tubing.

Tolerance

+/- .02 on all dimensions. Dimension data can change without notice. Please call when dimensions are critical.

Advantages

No flaring of tubing required
Easy installation, captive sleeve, pre-assembled for installation and can be reassembled
Nuts rotate around the sleeve during tightening, preventing twisting of tubing

Assembly Instructions

Cut tubing to desired length.
Slide nut/sleeve assembly on tube. Threaded end "A" of nut must face toward fitting.
Bottom tubing into fitting.
Plastic sleeve: Tighten nut hand tight.
Brass Sleeve: Tighten nut hand tight, then an additional 3/4 turn.

*Note: 1/8 and 3/16 sizes have brass sleeves

SKU: 02683-06
Connection Size 1	3/8 in
Connection Size 2	3/8 in
Connection Type	Flareless Tube\|Flareless Tube
Connection Type 1	Flareless
Connection Type 2	Flareless
Fitting Type	Union
Material	Brass
Material Construction	Brass

SKU: 02683-06

Connection Size 1

3/8 in

Connection Size 2

3/8 in

Connection Type

Flareless Tube|Flareless Tube

Connection Type 1

Flareless

Connection Type 2

Flareless

Fitting Type

Union

Material

Brass

Material Construction

Brass

Characteristic	Description
Typical Application	Pneumatic instrumentation circuits, lubricant and cooling lines.
Working Pressure and Temperature Ranges	Up to 150 PSI from 0°F to +150°F with thermoplastic tubing. Up to 300 PSI from 0°F to +175°F with soft metal tubing.
Maximum allowable metal tube wall thickness for use with Poly-Tite fittings	1/8", 3/16" O.D.: no limitation 1/4" O.D.: .035 5/16", 3/8", 1/2" O.D.: .049
Vibration	Excellent Resistance.
Temperature Range	-65°F to +250°F (-53°C to +121°C) with brass sleeve -40°F to +150°F (-40°C to +66°C) with plastic sleeve (Refer to tubing temperature range.)
Used With	Aluminum & copper tubing. Hard plastic tubing requires brass sleeve. Not recommended for steel tubing.
Tolerance	+/- .02 on all dimensions. Dimension data can change without notice. Please call when dimensions are critical.
Advantages	No flaring of tubing required Easy installation, captive sleeve, pre-assembled for installation and can be reassembled Nuts rotate around the sleeve during tightening, preventing twisting of tubing
Assembly Instructions	Cut tubing to desired length. Slide nut/sleeve assembly on tube. Threaded end "A" of nut must face toward fitting. Bottom tubing into fitting. Plastic sleeve: Tighten nut hand tight. Brass Sleeve: Tighten nut hand tight, then an additional 3/4 turn. *Note: 1/8 and 3/16 sizes have brass sleeves

Characteristic

Description

Typical Application

Pneumatic instrumentation circuits, lubricant and cooling lines.

Working Pressure and Temperature Ranges

Up to 150 PSI from 0°F to +150°F with thermoplastic tubing.
Up to 300 PSI from 0°F to +175°F with soft metal tubing.

Maximum allowable metal tube wall thickness for use with Poly-Tite fittings

1/8", 3/16" O.D.: no limitation
1/4" O.D.: .035
5/16", 3/8", 1/2" O.D.: .049

Vibration

Excellent Resistance.

Temperature Range

-65°F to +250°F (-53°C to +121°C) with brass sleeve
-40°F to +150°F (-40°C to +66°C) with plastic sleeve

(Refer to tubing temperature range.)

Used With

Aluminum & copper tubing. Hard plastic tubing requires brass sleeve. Not recommended for steel tubing.

Tolerance

+/- .02 on all dimensions. Dimension data can change without notice. Please call when dimensions are critical.

Advantages

No flaring of tubing required
Easy installation, captive sleeve, pre-assembled for installation and can be reassembled
Nuts rotate around the sleeve during tightening, preventing twisting of tubing

Assembly Instructions

Cut tubing to desired length.
Slide nut/sleeve assembly on tube. Threaded end "A" of nut must face toward fitting.
Bottom tubing into fitting.
Plastic sleeve: Tighten nut hand tight.
Brass Sleeve: Tighten nut hand tight, then an additional 3/4 turn.

*Note: 1/8 and 3/16 sizes have brass sleeves

Midland Industries 02683-04 Bulkhead Tank Union, 1/4" Flareless x 1/4" Flareless, Brass

Midland Industries 02692-0604 Quick Disconnect Adapter, 3/8" Flareless x 1/4" Flareless, Brass

Price: $23.90

Add

Midland Industries 17090N Bulkhead Union, 3/8" Compression x 3/8" Compression, Nylon, White

Midland Industries 44602LFUSA - 3/8 LF Domestic Brass UNION

Midland Industries 17105P Union Tee, 3/8" Compression x 3/8" Compression x 3/8" Compression,

Midland Industries 02683-06 Bulkhead Tank Union, 3/8" Flareless x 3/8" Flareless, Brass

Midland Industries 02683-06 Bulkhead Tank Union, 3/8" Flareless x 3/8" Flareless, Brass

Have a Question? ASK NATE

Essential Accessories

Have a Question?
ASK NATE