Midland Industries 30233 Adapter, 3/8" Push-On Hose Barbed x 1/2" Female SAE 45 deg/37 deg JIC Swivel, Brass
| SKU: 30233 | 
|---|
| Additional Information | 0.100 lb Weight | 
| Connection Size 1 | 3/8 in | 
| Connection Size 2 | 1/2 in | 
| Connection Type | Barbed|Female JIC Swivel | 
| Connection Type 1 | Push-On Hose Barbed | 
| Connection Type 2 | Female SAE 45 deg/37 deg JIC Swivel | 
| Dimensions | 1.79 in L | 
| Fitting Type | Adapter | 
| Hex Size | 0.87 in | 
| Material | Brass | 
| Material Construction | Brass | 
| Maximum Operating Pressure | 150 psi | 
| Thread Size | 3/4-16 | 
Typical Application: Low Pressure Air, Fuel, Lube, and Oil Lines Pressure determined by tube material and hardness.
Our parts have been tested to max 150 PSI. Advantages: Easy assembly. No clamps needed!!
Assembly Instructions:
1- Lubricate insert.
2- Hold hose at angle as shown & push on and up
over first barb.
3- Continue to push straight on until hose is seated
under protective plastic cap. Keep hands back from
hose end area so that hose can expand.
Disassembling Instructions:
1- Split hose. Do not cut completely through hose.
Sealing edge of barb could be damaged.
2- Bend hose and remove with a quick pull.
See lead free section for lead free push-on barb fittings.
Stainless steel available at the end of this
section.