Midland Industries 30366G Replacement Gasket
SKU: 30366G |
---|
Additional Information | For Use With 3/4 in Push-On Barb Swivel, 0.32 lb Weight |
Typical Application: Low Pressure Air, Fuel, Lube, and Oil Lines Pressure determined by tube material and hardness.
Our parts have been tested to max 150 PSI. Advantages: Easy assembly. No clamps needed!!
Assembly Instructions:
1- Lubricate insert.
2- Hold hose at angle as shown & push on and up
over first barb.
3- Continue to push straight on until hose is seated
under protective plastic cap. Keep hands back from
hose end area so that hose can expand.
Disassembling Instructions:
1- Split hose. Do not cut completely through hose.
Sealing edge of barb could be damaged.
2- Bend hose and remove with a quick pull.
See lead free section for lead free push-on barb fittings.
Stainless steel available at the end of this
section.