PALMGREN 9680213 - 9" x 20" Bench Combination Engine Lathe & Variable Speed Mill
Palmgren's combination 9" bench engine lathe and gear head mill delivers the precision, power and versatility to handle a wide range of turning, milling and drilling operations normally found in much larger machines.Heavy cast iron construction, smooth power transmission with precision thrust and ball bearings in the head stock and spindles, hardened and ground ways all designed to go give you years of trouble-free, precise turning, milling and hole making machining. Built and inspected to the DIN 8606 toolmakers precision lathe standard assuring accuracy and consistent performance.
The all gear drive transmission on the mill delivers full power at any speed driving the cutting tools at nearly 100% of available horsepower and torque. With such a wide range of versatility and features, this all-purpose combination lathe/mill is one of the most function manual machine centers that can operate in all types and sizes of shops.
Features
Specifications
| Lathes Type | Gear Head |
|---|
| Milling Cap of End Mill Cutter | 3/4" |
|---|
| Motor HP | 5/8 |
|---|
| Number of Spindle Speeds | 6 |
|---|
| Overall Dimensions (LxWxH) | 33-1/2" x 49" x 23" |
|---|
| Pitch | 0.2 - 4 / 8 - 56 |
|---|
| Milling Cap Inserted Tooth Cut | 2-1/2" |
|---|
| Longitudinal Feed Rates | 0.003" 0.004" 0.006" 0.008 0.012" 0.016" |
|---|
| Low Speed | 100 - 1500 |
|---|
| Max Turning Diameter | 9-7/8" |
|---|
| Mill Weight | 132 |
|---|
| Spindle Holding Fixture | MT2 3/8"-16 Draw Bar |
|---|
| Spindle Hole | 1" |
|---|
| Travel Top Slide | 19-1/2" |
|---|
| T-Slot Size/Distance/Quantity | 5/8" |
|---|
| Voltage | 115 |
|---|
| Working Radius | 6-3/4" |
|---|
| Spindle Travel | 2" |
|---|
| Swivel of the Milling Head | + / - 90° |
|---|
| Table Dimensions | 10" x 4-3/4" |
|---|
| Tailstock Sleeve Travel | 2-1/2" |
|---|
| Tailstock Taper | MT2 |
|---|
| Z-Axis Travel | 10-1/2" |
|---|
| Master Pack Height (in) | 33.5 |
|---|
| Master Pack Length (in) | 2.38 |
|---|
| Master Pack Weight (lbs) | 1.4 |
|---|
| Master Pack Width (in) | 2.38 |
|---|
| Warranty | 3 Year |
|---|
| UPC | 726896802138 |
|---|
| Country of Origin | CN |
|---|
| Brand | Palmgren |
|---|
| Unit of Measure | Each |
|---|
| Product Weight (lbs) | 452 |
|---|
| Distance Between Centers | 20" |
|---|
| Phase | Single |
|---|
| Gear Stages | 2 |
|---|
| Height Of Center | 4-3/4" |
|---|
| High Range | 200 - 3000 |
|---|
| Lathe Motor | 1PH - 115V - 13.6 Amps - 1PH - 60 Hz |
|---|
| Lathe Weight | 452 |
|---|
| Drilling Capacity in Cast Iron | 5/8" |
|---|
| Dist. Btwn. Cntr. & Comp. Tab. | 3" |
|---|
| Swing Over Bed | 9" |
|---|
| 4 Position Tool Post Height | 3-3/4" |
|---|
| Bed Width | 5-7/8" |
|---|
| Chuck Size | 5" |
|---|
| Compound Travel | 3-9/16" |
|---|
