PFERD 20027 - HSS Twist Drill Jobber Length M2 7/16" STEEL

Drill bits with cross grinding for industrial use. Fully ground, right-hand turning to produce precise drill holes due to their high concentricity and exact centering. PFERD offers spiral drills STEEL (118° point angle) and INOX (135° point angle) versions.High-performance HSSG (M2) drill bit for industrial use on STEEL. The fully ground right-hand turning design with cross grinding provides an exact centering drill tip and a high level of concentricity.

Advantages:

• Very good chip removal.
• High concentricity.
• Exact centering and low feed force thanks to cross grinding.
• Designed for universal use on steel, cast steel, grey cast iron, annealed cast iron, bronze, brass, aluminum.
• Easy centering.
• Durable.

Recommendations for Use:

• Observe the recommended rotational speed.
• When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill service life. Exception: when working on aluminum, use kerosene instead of cutting oil.
• To avoid corrosion when working on stainless steel (INOX), remove any particles that break away from the workpiece. Clean the workpiece chemically or mechanically (etching/polishing, etc.).

Workpiece Materials:

• Aluminum
• Annealed cast iron
• Black annealed cast iron (GTS, GJMB)
• Brass
• Bronze
• Case-hardened steels
• Casting scale
• Casting scale with sand contamination and metal contamination
• Cast iron
• Cast steel
• Chipboard
• Copper
• Ductile cast iron
• Elastomers
• Fibre-reinforced thermosetting plastics (GRP, CRP)
• Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %
• Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %
• Grey/nodular cast iron (GG/GJL, GGG/GJS)
• Hard non-ferrous metal
• Hardwood
• Other
• Other non-ferrous metals
• Plastics
• Roller-bearing and ball-bearing steels
• Soft non-ferrous metal
• Soft titanium alloys (tensile strength 500 N/mm²)
• Soft wood
• Steel
• Steel, cast steel
• Steels over 220 HV (> 95 HB)
• Steels up to 220 HV (< 95 HB)
• Steels up to 370 HV (< 38 HRC)
• Thermoplastics
• Thermosetting plastics
• Titanium
• Titanium alloys
• Tool steels
• White annealed cast iron (GTW, GJMW)
• Wood
• Zinc

Applications

• Drilling

Compatible Power Tools:

• Column drill
• Power drill
• Robot
• Stationary machines
• Tool machine

Specifications: