PFERD 27524 Carbide Bur - Tree Shape, MICRO Cut 1/8" x 1/2" x 1/8" Shank - SF-42

PFERD produces an extensive range of top quality carbide burs and bi-metal hole saws. PFERD burs deliver very high stock removal performance over their entire service life, providing outstanding results in minimal time.

Carbide burs with MICRO cut are specifically designed for finishing and are used in areas in which abrasive mounted points are usually used. They offer a higher stock removal rate and produce a high surface quality, particularly compared with conventionally milled surfaces.

They also operate with low vibration and little noise. They maintain their geometry over their entire service life, and are well suited to manual and machine applications. Almost all materials up to a hardness of 940 HV (68 HRC) can be machined.

• Bronze
• Other non-ferrous metals
• Hard non-ferrous metal
• Stainless steel (INOX)
• Case-hardened steels
• Steel, cast steel
• Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)
• Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)
• Hardened, heat-treated steels over 700 N/mm¬≤ (> 220 HB)
• Grey/nodular cast iron (GG/GJL, GGG/GJS)
• Cast iron
• Cobalt-based alloys
• High-temperature-resistant materials
• Hard non-ferrous metal
• Nickel-based alloys (e. g. Inconell and Hasteloy)
• Black cast iron (GTS, GJMB)
• Annealed cast iron
• Steel
• Steel, cast steel
• Steels up to 1,200 N/mm¬≤ (< 38 HRC)
• Steels up to 700 N/mm¬≤ (< 220 HB)
• Cast steel
• Annealed cast iron
• Titanium
• Titanium alloys
• White annealed cast iron (GTW, GJMW)
• Tool steels

• Milling out
• Weld dressing
• Deburring
• Cutting out holes
• Surface work
• Milling
• Weld dressing

• Flexible shaft drive
• Straight grinder
• Robot applications
• Stationary machines
• Stationary machines
• Machine tool

Specifications: