PFERD 48209 8" x 1/2" Convolute Wheel 3" A.H. - A/O Coarse (MH) 8AM
PFERD offers a wide range of coated and non-woven abrasive tools for face-down grinding, belt grinding, peripheral grinding, surface conditioning, polishing, and much more.
POLINOX convolute wheels consist of non-woven abrasive which is spiral-wound around a core and foamed up. The foam supports the non-woven component and improves its service life and abrasive performance. This particular bond results in non-woven wheels with a very good surface finish, high stock removal rate and long service life.
These properties are particularly apparent when deburring, blending, finishing and polishing soft metals, alloyed and high-alloy steels, in addition to titanium alloys. The wheels can be used on automated appliances and bench grinders, in addition to portable power tools such as straight grinders. By dressing the wheels, they can also be adapted to the geometry of special workpieces.
Varied application options, for example: Rounding of edges, Fine grinding of implants, Weld dressing of intersections on turbine blades, Removal of processing traces on surgical instruments, Create matte surface finishes.Materials that can be worked:- Aluminium
- Bronze
- Other non-ferrous metals
- Hard non-ferrous metal
- Stainless steel (INOX)
- Fibre-reinforced duroplastics (GRP, CRP)
- Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)
- Cobalt-based alloys
- High-temperature-resistant materials
- Copper
- Soft non-ferrous metal
- Brass
- Nickel-based alloys (e. g. Inconell and Hasteloy)
- Steels up to 1,200 N/mm² (< 38 HRC)
- Cast steel
- Steel materials with a hardness over 54 HRC
- Steel, cast steel
- Thermoplastics
- Titanium
- Titanium alloys
- Zinc
Applications:- Roughening
- Deburring
- Surface work
- Cleaning
- Structuring (matt finishing, brush matting and satin finishing)
- Fine grinding in multiple steps
Drive types:- Flexible shaft drive
- Straight grinder
- Bench grinder
- Stationary machines
Specifications:
| Diameter | 8 |
| Height | 1/2 |
| Grit size | coarse |
| Recom. RPM from | 1900 RPM |
| Max. RPM | 3850 RPM |
| Abrasive | A |
| Density | MH (medium-hard) |
| Bore | 3 |
| Packing unit | 1 pcs. |
| EDP number | 48209 |
