PFERD 48429 6" x 1" Unitized Wheel 1" A.H., A/O Coarse (H) 8AC
PFERD offers a wide range of coated and non-woven abrasive tools for face-down grinding, belt grinding, peripheral grinding, surface conditioning, polishing, and much more.
POLINOX unitized wheels and discs consist of multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system. This particular bond results in non-woven products with a very good surface finish, high stock removal rate and long service life.
These properties are particularly apparent when deburring, blending, finishing and polishing soft metals, alloyed and high-alloy steels, in addition to titanium alloys.
Type for straight grinders, flexible shafts and bench grinders: Ideal for work on smaller surfaces. Type for variable-speed angle grinders and fillet weld grinders: They are ideal for work on fillet welds and very hard-to-reach slots or indentations.Materials that can be worked:- Aluminium
- Bronze
- Other non-ferrous metals
- Hard non-ferrous metal
- Stainless steel (INOX)
- Fibre-reinforced duroplastics (GRP, CRP)
- Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)
- Cobalt-based alloys
- High-temperature-resistant materials
- Copper
- Soft non-ferrous metal
- Brass
- Nickel-based alloys (e. g. Inconell and Hasteloy)
- Steels up to 1,200 N/mm² (< 38 HRC)
- Cast steel
- Steel materials with a hardness over 54 HRC
- Steel, cast steel
- Thermoplastics
- Titanium
- Titanium alloys
- Zinc
Applications:- Roughening
- Deburring
- Surface work
- Cleaning
- Structuring (matt finishing, brush matting and satin finishing)
- Fine grinding in multiple steps
Drive types:- Flexible shaft drive
- Straight grinder
- Bench grinder
- Stationary machines
Specifications:
| Diameter | 6 |
| Height | 1 |
| Grit size | coarse |
| Recom. RPM from | 3200 RPM |
| Max. RPM | 5100 RPM |
| Abrasive | A |
| Density | H (hard) |
| Spec. | 8AC |
| Bore | 1 |
| Packing unit | 1 pcs. |
| EDP number | 48429 |
