PFERD 48441 3" Unitized COMBIDISC Type CD, A/O Coarse (W) 8AM
PFERD offers a wide range of coated and non-woven abrasive tools for face-down grinding, belt grinding, peripheral grinding, surface conditioning, polishing, and much more.
For achieving a very fine, uniform surface finish which, depending on requirements, is a sufficient preparation for high-gloss polishing. Ideal for work on small and medium-sized surfaces of stainless steel (INOX) components. The different thicknesses/hardnesses of the non-woven material are colour-coded: W (soft) = grey, MH (medium-hard) = dark blue, H (hard) = redMaterials that can be worked:- Aluminium
- Bronze
- Other non-ferrous metals
- Hard non-ferrous metal
- Stainless steel (INOX)
- Fibre-reinforced duroplastics (GRP, CRP)
- Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)
- Cobalt-based alloys
- High-temperature-resistant materials
- Copper
- Soft non-ferrous metal
- Brass
- Nickel-based alloys (e. g. Inconell and Hasteloy)
- Steels up to 1,200 N/mm² (< 38 HRC)
- Cast steel
- Steel materials with a hardness over 54 HRC
- Steel, cast steel
- Thermoplastics
- Titanium
- Titanium alloys
Applications:- Roughening
- Deburring
- Surface work
- Cleaning
- Weld dressing
- Structuring (matt finishing, brush matting and satin finishing)
- Fine grinding in multiple steps
Drive types:- Cordless angle grinder
- Angle grinder
- Flexible shaft drive
- Straight grinder
- Angle grinder
Specifications:
| Diameter | 3 |
| Grit size | coarse |
| Recom. RPM from | 6400 RPM |
| Max. RPM | 12500 RPM |
| Abrasive | A |
| Density | soft |
| Packing unit | 25 pcs. |
| EDP number | 48441 |
