Powermatic 1353001 3520C Lathe, 2HP, 1PH, 220V
The Powermatic 3520C is the fourth evolution of the time honored lathe with many new and improved features. The 3520C has retained all the features of the prior models such as the sliding headstock, electronic variable speed with low and high speed ranges, the spindle lock, digital RPM readout, and a laser etched quill that is self-ejecting. The enhanced features include a movable control box for maximum versatility, adjustable riser blocks for 6 inches or more of height adjustment, and an increased weight of 726 LBS (814 LBS with the bed extension). Additional features include a new ergonomic spindle lock design, a digital indexing readout, an Anti-rotation tailstock key for smoother operation, a set of dead centers which hold a spindle for visual comparison, a two position mount for the optional bed extension, and a sliding hammer knockout rod with brass tip.

Features:

Digital indexing readout simplifies the indexing process for added precision
Magnetic-backed moveable control box for customizable versatility and safety
Adjustable risers blocks for 4 inches of height adjustment,allowing maximum comfort when turning
Upgraded banjo features a non-marring, pinch style clamp for solid tool rest placement
Extended spindle nose increased access to the work piece
Able to maintain speeds as low as 15 RPM
Tailstock incorporates anti-rotation key and Acme threads for smoother operation and increased longevity
Self-locating ergonomic spindle lock design for easy, one handed operation
Fully enclosed VFD for increased user protection
Main power disconnect switch located on rear of headstock

Specifications

Size (In.)	20
Style (Type)	Leg Stand
Swing Over Bed (In.)	20
Swing Over Tool Rest Base (In.)	15-3/4
Distance Between Centers (In.)	36 w/dual bearing center
Headstock Movement	Full Length of Bed
Spindle Bore	5/8
Tailstock Bore	3/8
Spindle Taper	MT-2
Quill Taper	MT-2
Ram Travel Quill Travel	4-1/2"
Spindle Threads (In. x TPI)	1-1/4 x 8
Outboard External Threads (In. x TPI)	1-3/16-18UNC
Spindle Speeds	Low 15-1200/High 40-3200
Speed Range	15-1200, 40-3200
Number of Indexing Positions	48
Centerline of Spindle to Floor (In.)	40-5/8 without Risers
Outboard Turning	38
Bed Construction	Cast Iron
Motor Power (HP)	2
Motor Phase	3
Motor Voltage (V.)	230 Only
Prewired Voltage (V.)	230 Only
Wiring Remarks	Single Phase ONLY
Motor Current (Amps)	6.2
Recommended Circuit Size (Amps.)	20
Height	0.0000
Length	0.0000
Weight	770.0000
Width	0.0000