Reelcraft SK600888-1 - Buna N Seal Kit

Item #: SK600888-1

MSRP: Price: $64.79

Price: with strikethrough $64.79

Retail Price:

Sale Price: Price $42.49

(You save $22.30 )

Most orders over $299
ship for free | See Details

Have a Question?
ASK NATE

Get Expert Advice or

Call 888-654-8898

Get Expert Advice or

Call 888-654-8898

Need this Product for a Specific Application?

Use our handy finder to find the exact model for your needs.

FIND MY PRODUCT

Item Description

Reelcraft SK600888-1 Buna N Seal Replacement Kit

Procedure:
Disassembly:
1. Utilizing a retaining righ pliers, remove retaining ring from it's groove and discard. Do not damage retaining ring groove on shaft
2. Remove shaft from housing
3. Utilizing a scribe, remove primary O-rings, being careful not to damage O-ring groove surfaces. If applicable, the port O-ring shall also be removed.
4. Upon disassembly, examine shaft for excessive wear. Examine housing bore for nicks and scratches. If excessive wear, scratches, or nicks are present the swivel is not repairable and should be replaced.
5. Thoroughly clean shaft and housing.

Assembly:
1. Coat primary O-rings with oil and install into grooves on shaft. If applicable, install port O-ring over threads.
2. Insert shaft into housing and secure using retaining ring.
3. Inspect to insure retaining ring is fully positioned in groove.
Specifications

Reelcraft SK600888-1 Buna N Seal Replacement Kit

Procedure:
Disassembly:
1. Utilizing a retaining righ pliers, remove retaining ring from it's groove and discard. Do not damage retaining ring groove on shaft
2. Remove shaft from housing
3. Utilizing a scribe, remove primary O-rings, being careful not to damage O-ring groove surfaces. If applicable, the port O-ring shall also be removed.
4. Upon disassembly, examine shaft for excessive wear. Examine housing bore for nicks and scratches. If excessive wear, scratches, or nicks are present the swivel is not repairable and should be replaced.
5. Thoroughly clean shaft and housing.

Assembly:
1. Coat primary O-rings with oil and install into grooves on shaft. If applicable, install port O-ring over threads.
2. Insert shaft into housing and secure using retaining ring.
3. Inspect to insure retaining ring is fully positioned in groove.

Technical Support

Service Manual

Reelcraft SK600888-1 - Buna N Seal Kit

Reelcraft SK600888-1 - Buna N Seal Kit

Have a Question? ASK NATE

Have a Question?
ASK NATE