Simpson Strong-Tie AT-XP13 Fast-Curing Acrylic Anchoring Adhesive
Formulated for high-strength anchorage of threaded rod and rebar into cracked and uncracked concrete and masonry under a wide range of conditions, AT-XP adhesive dispenses easily in cold or warm environments and in below-freezing temperatures with no need to warm the cartridge. When mixed properly, this low-odor formula is a dark teal color for easy post-installation identification.
Key Features
- Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to reduced and elevated temperatures and long-term sustained loads
- Code listed under the IBC/IRC for cracked and uncracked concrete per IAPMO UES ER-263 and City of L.A. RR25960
- Code listed under the IBC/IRC for masonry per IAPMO UES ER-281 and City of L.A. RR25966
- AT-XP is code listed for installation with the Speed Clean™ DXS system without any further cleaning (AT-XP: IAPMO-UES ER-263)
- 10:1 two-component high-strength, acrylic-based anchoring adhesive
- Suitable for use under static and seismic loading conditions in cracked and uncracked concrete as well as masonry
- Easy hole-cleaning procedure — no power-brushing required
- Suitable for use in dry or water-saturated concrete
- For best results, store between 14°F (–10°C) and 80°F (27°C)
- Cures in substrate temperatures as low as 14°F (–10°C) in 24 hours or less
- Available in 9.4 oz., 12.5 oz. and 30 oz. cartridges for application versatility
- Volatile Organic Compound (VOC) – 30 g/L
- Manufactured in the USA using global materials
Applications
- Concrete Block: Grouted
- Mass Timber / Cross-Laminated Timber
- Concrete Block: Hollow (Ungrouted)
- Seismic (New Construction)
- Concrete: Cracked
- Water / Wastewater Facilities
- Seismic Retrofit
