Simpson Strong-Tie CBH2.37X7.63C-KT - 2-3/8" x 7-5/8" Joist to Column Concealed Hanger

Product Details

Computer modeling and CNC manufacturing enables glulam to be delivered to the jobsite in precise lengths and with preinstalled concealed hangers. The CBH concealed beam hanger is specifically designed for such applications and is installed with readily available Simpson Strong-Tie SDS Heavy-Duty Connector screws. The CBH hanger design provides for a +/– 1/32" beam length tolerance at each connector making it easier to crane into place than other concealed hanger designs that use machined aluminum.

Key Features

• 1/32" tolerance on each end enables easier installation
• Multiple router option to suit jobsite needs
• Concealed for architectural aesthetics and fire-rated performance
• Code-listed per ICC-ESR-2552

Material

• 3 ga.

Finish

• Electro-galvanized. May be ordered as HDG

Installation

• Use all specified fasteners
• Rout carried and/or carrying member according to application needs. The minimum recommended router width and length is 1/16’’ larger than the tabulated part dimensions. The recommended corner radius is 1/4. The back plates must seat flush against the surfaces to which they are being fastened.
• Install CBH plates on carried and carrying members using all specified SDS fasteners
• Mate carried member to carrying member according to installation illustrations
• Note that the tolerances for glulam finished dimensions provided within CSA 0122 for Canada and ANSI 117 for the United States may not provide adequate squareness and depth consistency required to ensure problem-free field installation. To achieve a problem free installation glulam producers are advising that both beam and column members should be designed with a 1/4 (6mm) undersize in depth and 1/8 (3 mm) in width (eg: 5 1/8x12 beam becomes 5x11 3/4) so that more aggressive planing can be used to achieve the desired squareness and depth tolerances needed for this hanger. In addition it is suggested to avoid cambered beams with this hanger and instead design deeper or wider beams to control deflection.

Specifications: