Simpson Strong-Tie CCCQM4.62-SDSG - Cross CC Masonry 4.62 w/ Screws HDG

The CCCQM embedded column cap is designed for use in raised pier foundations and applications where heavy beams rest on concrete or concrete block columns. The heavy-gauge beam seat and unique Simpson Strong-Tie^® SSTB^® anchor bolts provide the high uplift and lateral resistance needed to help resist high-wind events. The CCCQM is for use along a floor support beam with a stirrup on each side of the main channel to accommodate intermediate support beams at 90° angles.

Key Features

• Screws are configured to provide high uplift design values
• Certified welds for confidence in strength and loading
• SSTB offset allows flush installation to edge of pier
• SSTBs spaced to fit standard CMU cells

Finish

• Hot-dip galvanized or Simpson Strong-Tie gray paint; see Corrosion Information

Installation

• Install 1/4" x 2 1/2" Strong-Drive^® SDS Heavy-Duty Connector screws (provided) in all round holes. (Lag screws will not achieve the same load.)
• Min. (4) #7 vertical rebar (total for pier).
• No additional welding is allowed.

Options

• Available in widths up to nominal 7-1/8" width.
• For variable widths on side stirrups, specify W₃ or W₄ (3 1/4" to 7 1/8") and add an "X" to the end of the core model name. Example: CCCQM5.50X-SDS, W₃ = 3 5/8", W₄ = 3 5/8".

Ordering Information

• Configurations for many different beams or beam-to-beam combinations can be manufactured (refer to worksheet Options for Column Caps for Concrete-Filled Pilasters, Grout-Filled CMU or Concrete Piers, T-C-CCQM-WS).