Simpson Strong-Tie CIGV32 CI-GV Gel-Viscosity Cartridge System, 32oz.

CI-GV Structural Injection Epoxy Gel is a two-component, high-modulus, high-solids, moisture-tolerant, thixotropic epoxy designed for pressure injection of concrete cracks. CI-GV is suitable for vertical and horizontal crack sealing and general concrete repair applications when substrate temperatures are between 40°F (4°C)–90°F (32°C). Available in 3-gallon bulk kits or convenient side-by-side cartridges dispensed through a static mixing nozzle using either a manual, battery-powered or pneumatic dispensing tool.

• Meets the requirements of ASTM C881 & AASHTO M235, Type I/II, Grade 3, Class B and ASTM C881 & AASHTO M235, Type I/IV and II/V, Grade 3, Class C.
• Chemically bonds with the concrete to provide a structural repair. CI-GV seals the crack from moisture, protecting rebar in the concrete from corrosion.
• Gel-viscosity moisture-tolerant; can be used on dry and damp surfaces.
• Formulated for maximum penetration under pressure.
• Decreases in viscosity under pressure for increased flowability.
• Non-shrink.
• Can be used with metered pressure-injection equipment.
• Freeze-thaw resistant.

• As a gel-viscosity epoxy for repair of medium cracks 3/32" – 1/4" (2.4–6 mm) in width
• For structural repairs
• For vertical and horizontal crack sealing
• As a pick-proof sealant
• For underwater pressure-injection applications

• 2:1

• Store dry between 45° and 90°F (7°–32°C)

• 2 years in unopened packaging

• 10 g/L (mixed)

32 fl. oz. (946 mL) dual cartridge (CIGV32), 5 per carton;

3 US gallon (11.4 L) bulk kit (CIGV3KT) contains:

• (2) 1 US gallon (3.8 L) cans of Component “A” (CIGV1A)
• 1 US gallon (3.8 L) can of Component “B” (CIGV1B)