Simpson Strong-Tie CIP-F22 Flexible Crack Injection Paste Over 22oz w/ Nozzle

Crack Repair Accessories

CIP-F is a flexible, peelable and fast-curing polyurea paste-over material. It is used to temporarily seal cracks and to secure injection ports over concrete prior to epoxy or urethane foam injection repair. CIP-F can be peeled off at the completion of a crack injection job by pulling on starter tabs placed under the lead edge surface at the time of application or by prying under the paste-over.

Key Features

• 1:1 two component, high solids, epoxy amine based adhesive
• Non-sag paste consistency for horizontal, vertical or overhead applications
• Fast cure times for shorter times between paste-over and injection
• Remains flexible after cure for easier removal
• Moderate substrate bond; peels away for removal
• Gel Time — 4 minutes at 72°F (22°C), 9 minutes at 40°F (4°C)
• Cure Time — 1 hour at 72°F (22°C), and 3 hours at 40°F (4°C)
• Volatile organic compound (VOC) — 0 g/L
• Manufactured in the USA using global materials

Applications

• Crack Repair: Structural
• Crack Repair: Non-Structural
• Water / Wastewater Facilities

Specifications:

Product Includes

• One EMNCIPF22 mixing nozzle is supplied with each cartridge

Storage Conditions

• For best results, store between 60°F (16°C) – 95°F (35°C)

Shelf Life

• 12 months from date of manufacture, unopened

Installation

• Apply to concrete 40°F (4°C) or above. For best results, warm material to 65°F (16°C) or above prior to application.