CI-SLV super-low-viscosity structural injection epoxy is a two-component, high-modulus, high-solids, moisture-tolerant epoxy specially designed for pressure injection, gravity feeding and flood coat filling of concrete cracks when substrate temperatures are between 60°F (16°C) to 90°F (32°C). Available in 3-gallon bulk kits or convenient side-by-side cartridges dispensed through a static mixing nozzle using either a manual or pneumatic dispensing tool.
Meets the requirements of ASTM C881 & AASHTO M235, Type I/IV, Grade 1, Class C.
Chemically bonds with the concrete to provide a structural repair. CI-SLV seals the crack from moisture, protecting rebar in the concrete from corrosion.
Moisture-tolerant; can be used on dry and damp surfaces.
Low surface tension allows the material to effectively penetrate narrow cracks.
Formulated for maximum penetration under pressure.
Suitable for pressure injection or gravity-feed applications.
Non-shrink and resistant to oils, salts and mild chemicals.
Can be used with metered pressure-injection equipment.
Manufactured in the USA using global materials.
Pressure-injection of cracks in structural concrete
Gravity-feed and flood coat of cracks in horizontal concrete
As a low-viscosity epoxy (150 cP) for repair of hairline cracks (0.002") and cracks up to 1/4" (6 mm) in width
For structural repairs
For underwater pressure-injection applications
231 in.3/US gal. (0.001 m3/L)
Store dry between 45° and 90°F (7°–32°C)
2 years in unopened packaging
8 g/L (mixed)
32 fl. oz. (946 mL) dual cartridge (CISLV32), 5 per carton;
3 US gallon (11.4 L) bulk kit (CISLV3KT) contains:
(2) 1 US gallon (3.8 L) cans of Component “A” (CISLV1A)
1 US gallon (3.8 L) can of Component “B” (CISLV1B)
This product is covered by the Simpson Strong-Tie RPS Product One-Year Limited Warranty