Simpson Strong-Tie CS18S Galvanized Coiled Utility Strap, 18 gauge 100ft.
CMSTC provides coined nail slots for lower profile when installed with 0.148" x 3 1/4" sinkers; it can be cut to length. CS are continuous utility straps which can be cut to length on the jobsite. Packaged in lightweight (about 40 lb.) cartons.
Key Features:
-Gauge stamped on part for easy identification
Installation:
-Use all specified fasteners
-Wood shrinkage after strap installation across horizontal wood members may cause strap to buckle outward.
-Refer to the applicable code for minimum nail penetration and minimum wood edge and end distances.
-The table shows the maximum allowable loads and the nails required to obtain them. Fewer nails may be used; reduce the allowable load as shown in the General Notes for Straps and Ties.
-The cut length of the strap shall be equal to twice the End Length noted in the table plus the clear span dimension.
-CMST only use every other round hole if the wood tends to split. Use round and triangle holes for comparable MST loads, providing wood does not tend to split.
