Simpson Strong-Tie DGHT7.12/18 - Top-Flange Fire Wall Hanger for 7" x 18" Engineered Wood

Fire Wall Hangers for Plated Truss

This product's information may differ depending on the category of use. Fire Wall Hangers for Engineered Wood

Ideal for multifamily, multilevel Type III residential construction, the patent-pending DGHT^™ is a load-tested fire wall hanger with a two-hour fire rating. It's the first fire wall hanger designed to install with a power nailer, saving time before hanging drywall, which helps keep construction projects on schedule. This top-flange hanger provides space for two layers of 5/8" gypsum board (drywall) to be slipped into place after the framing is complete. The DGHT has been tested according to ASTM E814 and is fire rated for use on both sides of the wall. This heavier gauge hanger is available in standard, skewed or concealed options.

Key Features

• Loads tested and code listed for 1 1/2" and 2 1/2" power-driven or hand-installed nails
• Two-hour fire rating applies to 2x4 or thicker walls
• Innovative top-flange design for back-to-back installation on 2x6 (min.) walls
• Space for two layers of 5/8" drywall after framing
• Two-hour Fire-Resistant rating Intertek Design No. SST/WPCF 120-01

Finish

• Galvanized G90

Installation

• Use all specified fasteners. I-joists require web stiffeners.
• DGHT is mounted like a standard top-flange hanger. 
• Wall-plate splices must occur at a stud location.
• DGHT welded to steel header with (4) 1 1/2" fillet welds and (6) joist nails achieves a download of 2,700 lb. Face flanges require full backing.