Simpson Strong-Tie DU210 - Face-Mount Drywall Hanger for 2x10 w/ SDS Screws
Product Details
Engineered and tested to perform Simpson Strong-Tie hangers are manufactured to the highest quality standards for structural strength and safety. The DU face-mount hanger is designed for lighter use to carry joist floor loads to a wood stud wall over two layers of 5/8" gypsum board (drywall). The DU hanger installs after the drywall is in place.
Key Features
- Testing verifies that the DU hangers do not reduce the two-hour fire wall assembly rating in either 2x4 or 2x6 walls.
- DU fire wall hangers are code listed for structural use under ICC-ES ESR-2552.
- Hangers have been tested according to ASTM E814 and received F (flame) and T (temperature) ratings for use on one or both sides of the wall in Intertek Design No. SST/WPCF 120-01. If hangers are installed on both sides of the wall then it must be a 2x6 wall.
Material
Finish
Installation
- Use all specified fasteners
- Strong-Drive SDS Heavy-Duty Connector screws are provided with the hanger.
- Drywall is installed first.
- Mounted with top of hanger flush with top of wall and tight to the drywall.
- Wall top plates must be restrained to prevent rotation. Where gravity load on top of wall is less than 150 plf use a stud-plate tie connector at the back of each stud or provide equivalent restraint by another method as determined by designer.
- Upper plate splices must occur at a stud location.
Specifications:
| Joist Size | 2x10 |
| Ga. | 14 |
| W (in.) | 1 9/16 |
| H (in.) | 9 1/8 |
| B (in.) | 2 |
| Coating/Material | Zinc Galvanized, G90 |
| Product Includes | (4) 1/4 in. x 3-1/2 in. Strong Drive SDS Heavy-Duty Connector screws |
| Packaging Qty. | 1 |
