Simpson Strong-Tie GCN-LB1104 O-Ring
The GCN-MEPMAGKT gas-actuated concrete nailer is a portable fastener tool for attaching light-duty fixtures to concrete, steel, concrete block (CMU), lightweight concrete over metal deck, and cold-formed steel. As a magazine tool, GCN-MEPMAGKT is ideal for attaching drywall track, furring strips, hat track and angle track using GDP and GDPS collated pins.
GCN-MEPMAGKT offers you the flexibility of having two tools in one convenient package — a magazine tool and a single-shot tool, since the magazine is easily removed without additional assembly tools. As a single-shot tool, the GCN-MEPMAGKT is great for attaching mechanical, electrical and plumbing fixtures with pre-assembled pins/accessories such as washer pins, ceiling clips, tophats and threaded studs. The pre-assembled pins for the single-shot tool use 0.300"-headed fasteners with 0.125"-diameter shanks for stronger fastening performance.
Both the single-shot and magazine tool offer portability without the need for cords or hoses, and are actuated with GFC34 gas fuel cells.
Key Features
- Power to drive 0.125"-diameter pins
- Flexibility to drive 1/2" to 1 1/2" pins
- Flexibility to drive 0.250" and 0.300" dia. headed pins
- Pin-depth adjustment dial
- Battery charge indicator light
- Comfortable “sure-grip” rubber handle and ladder hook
- Easy start-up procedure: Insert fuel cell, insert battery, load pins, and begin use
Minimum Cleaning Required
The GCN-MEPMAGKT has a very efficient ignition system that provides complete fuel combustion. This results in a cleaner operating tool, which, in turn, results in more tool energy and higher productivity. To maintain maximum level of productivity, periodic cleaning is recommended.
- Only requires cleaning every 20,000 shots
- Easy access to the air filter and piston chamber
Applications
- Mechanical / Electrical / Plumbing
- Fastening to Structural Steel
- Direct Fastening
- Ceiling-Wire Fastening
- Concrete
- Cold-Formed Steel
- Drywall Track
Model No. | Option | Packaging Qty. |
GCN-MEPMAGKT | GCN-MEP nailer (with magazine) | 1 |
Specifications
- Tool dimensions:
– Length 12.5" (317.5 mm), 17" (432.8 mm)
– Tool weight: 6.6 lb. (3 kg), 8.3 lb. (3.7 kg) with magazine
– Height 15.3" (389 mm) - Compatible fasteners:
– Length: 1/2" (12.7 mm) to 1 1/2" (38 mm)
– Head diameter: 0.250" and 0.300"
– Shank diameter: 0.106" to 0.125" - Average number of shots per fuel cell: 1,200
- Average cyclic firing rate: 2 shots per second
- Average battery charge time (6V NiMH): 2 hours
- Operation temperature range: 20°–120°F (–6°–49°C)
- Magazine capacity: 42
- Maximum fastenings before reloading: 40
The magazine is designed to retain two pins during use to prevent the tool from discharging without a fastener (which can damage the tool and possibly cause injury). The tool will resume normal operation when additional pins are loaded.
Applications
The GCN-MEPMAGKT gas-actuated concrete nailer is ideal for fastening:
- Drywall track
- Lath wire for stucco
- Water-proofing membrane
- Furring strips
Product Includes
The GCN-MEPMAGKT kit includes:
- GCN-MEPMAG nailer
- 2 batteries
- Battery charger
- Charger adaptor
- Allen wrenches
- Safety glasses and ear plugs
- User manual / tool schematic
- Rugged tool box
Model Number | Description |
---|
|
|
|
|
GCN-ADP012 | Adapter |
GCN-CHG007 | Charger (U.S.) |
GCN-PPA020 | Battery (U.S.) |
|
|
|
|
|
|
|
|
Pins
- GDP
- GDPS
- GDPSK
- GTH
- GTS
- GW
- GAC
- GCC
- GCL
- GCT
- GRH
Fuel