Simpson Strong-Tie HHETA40 - 40-in. Galvanized Heavy Embedded Truss Anchor
Product Details
The HHETA provides an engineered method to attach roof trusses securely to concrete and masonry walls. This extra-heavy embedded truss anchor features staggered nail patterns to strengthen uplift resistance and can be used in pairs on single- and multi-ply trusses. The versatile HHETA can be installed straight or field-bent around truss or rafter members.
Key Features
- Indented embedment line ensures accurate embedment depth
- Compatible with the Simpson Strong-Tie TSS and TBP8 moisture barrier plate
- Load rated for wind and seismic forces
Material
Finish
Installation
- Use all specified fasteners
- Embedded 4" into a 6" min. concrete beam or 8" nominal grouted block wall.
- For mislocated truss anchors which are greater than 1/8" but less than 1-1/2" from the face of the truss a shim must be provided. Shim design by truss engineer. When gap is greater than 1-1/2" abandon existing embedded truss anchor and install new anchor per designer.
- Minimum spacing of single anchors is twice the embedment depth for full load. For closer spacing see loads for double anchor installation.
- In double anchor installations install anchors with spoons facing outward and straps spaced no more than 1/8" wider than the rafter/truss width. Do not install nails where the straps overlap when wrapped over the rafter/truss.
- Straps do not need to be wrapped over the rafter/truss to achieve tabulated loads unless noted otherwise.
Specifications:
| Ga. | 14 |
| H (in.) | 36 |
| Coating/Material | Zinc Galvanized, G90 |
| Packaging Qty. | 1 |
| |
