Simpson Strong-Tie HU26TF - Galvanized Top-Flange Joist Hanger for 2x6

Product Details

The HUTF is a hybrid hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty top-flange joist hanger features face-nailing that allows the hanger to be securely attached to the member. The HUTF is available with one "A" flange concealed.

Key Features

• Alternate heights and widths available by special order
• Can be skewed or sloped to a maximum of 45°
• HUTF-series hangers are tested load rated and code listed

Material

• 12 ga.

Finish

• Galvanized. Some products available in ZMAX or HDG

Installation

• Use all specified fasteners
• Not acceptable for nailer or welded applications
• HUTF — the minimum header or ledger size that can be used with this hanger is 3-1/2"

Sloped and/or Skewed Seat

• HUTF can be skewed to a maximum of 45° or sloped to a maximum of 45°. HUTF can be skewed and sloped down only provided W ≥ 2 3/8". No skew with slope up options available.
• For skews greater than 15° uplift loads are 0.75 of the table loads. Hangers with a skew greater than 15° may have all the joist nailing on the outside angle.
• For sloped and skewed combinations the allowable loads are 0.70 of the table loads.
• For sloped-down-only hangers allowable load is 0.78 of the table load.

Concealed Flange

• HUTF is available with one A flange concealed at 0.85 of the catalog table load.
• HUTF is available with both flanges concealed provided the W dimension is 2-9/16" or greater at 0.85 of the table load. for both flanges concealed. No skew options available.

Specifications: