Simpson Strong-Tie HU28-2TF - Galvanized Top-Flange Joist Hanger for Double 2x8
Product Details
The HUTF is a hybrid hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty top-flange joist hanger features face-nailing that allows the hanger to be securely attached to the member. The HUTF is available with one "A" flange concealed.
Key Features
- Alternate heights and widths available by special order
- Can be skewed or sloped to a maximum of 45°
- HUTF-series hangers are tested load rated and code listed
Material
Finish
- Galvanized. Some products available in ZMAX or HDG
Installation
- Use all specified fasteners
- Not acceptable for nailer or welded applications
- HUTF — the minimum header or ledger size that can be used with this hanger is 3-1/2"
Sloped and/or Skewed Seat
- HUTF can be skewed to a maximum of 45° or sloped to a maximum of 45°. HUTF can be skewed and sloped down only provided W ≥ 2 3/8". No skew with slope up options available.
- For skews greater than 15° uplift loads are 0.75 of the table loads. Hangers with a skew greater than 15° may have all the joist nailing on the outside angle.
- For sloped and skewed combinations the allowable loads are 0.70 of the table loads.
- For sloped-down-only hangers allowable load is 0.78 of the table load.
Concealed Flange
- HUTF is available with one A flange concealed at 0.85 of the catalog table load.
- HUTF is available with both flanges concealed provided the W dimension is 2-9/16" or greater at 0.85 of the table load. for both flanges concealed. No skew options available.
Specifications:
| Joist Size | Double 2x8 |
| Ga. | 12 |
| W (in.) | 3 1/8 |
| H (in.) | 7 1/8 |
| B (in.) | 2 1/2 |
| TF (in.) | 2 1/2 |
| Coating/Material | Zinc Galvanized, G90 |
| Packaging Qty. | 1 |
