Home
Simpson Strong-Tie
Anchoring Systems
Mechanical Anchors
Lag Screw Expansion Shield
Simpson Strong-Tie LSES25S - Lag Screw Expansion Shield 1/4" Short 100ct

Simpson Strong-Tie LSES25S - Lag Screw Expansion Shield 1/4" Short 100ct

Item #: LSES25S

Price: $16.36

Most orders over $299
ship for free | See Details

Have a Question?
ASK NATE

Get Expert Advice or

Call 888-654-8898

Get Expert Advice or

Call 888-654-8898

Need this Product for a Specific Application?

Use our handy finder to find the exact model for your needs.

FIND MY PRODUCT

Item Description

Simpson Strong-Tie LSES25S Lag Screw Expansion Shield 1/4" Short (100)

The Lag Screw Expansion Shield is a die cast zinc alloy expansion shield for anchoring lag screws in a variety of base materials, including concrete, concrete block, brick and mortar joints. Radial ribs provide additional holding power in softer material.

Installation:
Drill a hole in the base material using the appropriate-diameter carbide drill bit as specified in the table. Drill the hole to the specified embedment depth plus 1/8" for flush mounting and blow it clean using compressed air. Alternatively, drill the hole deep enough to accommodate embedment depth and dust from drilling. Overhead installations need not be blown clean.
Insert anchor into hole. Tap with hammer until flush with surface of base material.
Position fixture; insert screw and tighten.
Specifications

Simpson Strong-Tie LSES25S Lag Screw Expansion Shield 1/4" Short (100)

The Lag Screw Expansion Shield is a die cast zinc alloy expansion shield for anchoring lag screws in a variety of base materials, including concrete, concrete block, brick and mortar joints. Radial ribs provide additional holding power in softer material.

Installation:
Drill a hole in the base material using the appropriate-diameter carbide drill bit as specified in the table. Drill the hole to the specified embedment depth plus 1/8" for flush mounting and blow it clean using compressed air. Alternatively, drill the hole deep enough to accommodate embedment depth and dust from drilling. Overhead installations need not be blown clean.
Insert anchor into hole. Tap with hammer until flush with surface of base material.
Position fixture; insert screw and tighten.

Simpson Strong-Tie LSES25S - Lag Screw Expansion Shield 1/4" Short 100ct

Simpson Strong-Tie LSES25S - Lag Screw Expansion Shield 1/4" Short 100ct

Have a Question? ASK NATE

Have a Question?
ASK NATE