Simpson Strong-Tie LSSR26Z - Light Field-Adjustable Rafter Hanger for 2x6
Product Details
The patent-pending LSSR light slopeable/skewable rafter hanger is the next generation of a field-adjustable rafter hangers. One of its key features is that it can be installed after the rafter has been tacked into place. A versatile hanger it is field adjustable for skews up to 45° and features an innovative hinged swivel seat which adjusts up to a 45° slope.
Key Features
- Makes it possible to install after the rafters are already in place
- Flange design allows for easy skew adjustment from 0° to 45°
- Swivel seat adjusts easily from 0° to 45° up or down
Material
Finish
Installation
- Use all specified fasteners
- Limit on-center spacing of rafters and joists with LSSR210-2Z and LSSR410Z to 14" o.c. minimum; for the LSSR26Z LSSR28Z and LSSR210Z limit on-center spacing to 8" o.c. minimum
- For a common rafter:
- Slide hanger into position; adjust seat and install seat nails
- Make sure side stirrups are snug close to the joist bend lines are plumb
- Install a face nail on each side to hold in place
- Install all round and obround holes on the header and joist
- For jack rafters:
- Fold acute side forward
- Slide hanger into position; adjust seat and install seat nails
- Make sure hanger is snug close to the joist bend line is plumb
- Install obround nails on acute side both header and joist
- Make sure hanger is snug close to the joist and header; bend line is plumb
- Install joist nails on obtuse side
- Bend obtuse side flange back so that header flange is flush against header
- Install header nails
Specifications:
Joist Size (in.) | 1 1/2 |
Ga. | 18 |
W (in.) | 1 9/16 |
H (in.) | 5 3/8 |
A (in.) | 2 1/2 |
Coating/Material | ZMAX® |
Packaging Qty. | 1 |