Simpson Strong-Tie LUS310 - Galvanized Face-Mount Joist Hanger for 3x10

Item #: LUS310

MSRP: Price: $4.31

Price: with strikethrough $4.31

Retail Price:

Sale Price: Price $4.03

Clear Selection

Most orders over $299
ship for free | See Details

Have a Question?
ASK NATE

Get Expert Advice or

Call 888-654-8898

Get Expert Advice or

Call 888-654-8898

Need this Product for a Specific Application?

Use our handy finder to find the exact model for your needs.

FIND MY PRODUCT

Essential Accessories

Item Description
Simpson Strong-Tie LUS310 - Galvanized Face-Mount Joist Hanger for 3x10
Product Details
The LUS is an easy-to-install economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails faster installation and the use of all common nails for the same connection.
Key Features
- Cannot be modified
- Works for a wide range of applications
- Features speed prongs used to temporarily position and secure the connector for easier and faster installation
- LUS-series hangers are tested load rated and code compliant
Finish
- Galvanized. Some products available in stainless steel or ZMAX coating. See Corrosion Information.
Installation
- Use all specified fasteners
- Joist nails must be driven at an angle through the joist or truss into the header to achieve the table loads.
- Not designed for welded or nailer applications.
- With 3x carrying members: when 0.162" x 3-1/2" nails are specified use 0.162" x 2-1/2" nails into the header and 0.162" x 3-1/2" nails into the joist with no load reduction. When 0.148" x 3" nails are specified use 0.148" x 2-1/2" nails into the header and 0.148" x 3" nails into the joist with no load reduction.
- With 2x carrying members: when 0.162" x 3-1/2" nails are specified use 0.148" x 1-1/2" nails into the header and 0.148" x 3" nails into the joist and reduce the load to 0.64 of the table values. When 0.148" x 3" nails are specified use 0.148" x 1-1/2" nails into the header and 0.148" x 3" nails into the joist and reduce the load to 0.77 of the table values.
Specifications:
Ga. 18
W (in.) 2 9/16
H (in.) 7 1/4
B (in.) 2
Coating/Material Zinc Galvanized, G90
Packaging Qty. 1
Specifications
Simpson Strong-Tie LUS310 - Galvanized Face-Mount Joist Hanger for 3x10
Product Details
The LUS is an easy-to-install economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails faster installation and the use of all common nails for the same connection.
Key Features
- Cannot be modified
- Works for a wide range of applications
- Features speed prongs used to temporarily position and secure the connector for easier and faster installation
- LUS-series hangers are tested load rated and code compliant
Finish
- Galvanized. Some products available in stainless steel or ZMAX coating. See Corrosion Information.
Installation
- Use all specified fasteners
- Joist nails must be driven at an angle through the joist or truss into the header to achieve the table loads.
- Not designed for welded or nailer applications.
- With 3x carrying members: when 0.162" x 3-1/2" nails are specified use 0.162" x 2-1/2" nails into the header and 0.162" x 3-1/2" nails into the joist with no load reduction. When 0.148" x 3" nails are specified use 0.148" x 2-1/2" nails into the header and 0.148" x 3" nails into the joist with no load reduction.
- With 2x carrying members: when 0.162" x 3-1/2" nails are specified use 0.148" x 1-1/2" nails into the header and 0.148" x 3" nails into the joist and reduce the load to 0.64 of the table values. When 0.148" x 3" nails are specified use 0.148" x 1-1/2" nails into the header and 0.148" x 3" nails into the joist and reduce the load to 0.77 of the table values.
Specifications:
Ga. 18
W (in.) 2 9/16
H (in.) 7 1/4
B (in.) 2
Coating/Material Zinc Galvanized, G90
Packaging Qty. 1
Accessories
Simpson Strong-Tie LUS310 - Galvanized Face-Mount Joist Hanger for 3x10
Product Details
The LUS is an easy-to-install economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails faster installation and the use of all common nails for the same connection.
Key Features
- Cannot be modified
- Works for a wide range of applications
- Features speed prongs used to temporarily position and secure the connector for easier and faster installation
- LUS-series hangers are tested load rated and code compliant
Finish
- Galvanized. Some products available in stainless steel or ZMAX coating. See Corrosion Information.
Installation
- Use all specified fasteners
- Joist nails must be driven at an angle through the joist or truss into the header to achieve the table loads.
- Not designed for welded or nailer applications.
- With 3x carrying members: when 0.162" x 3-1/2" nails are specified use 0.162" x 2-1/2" nails into the header and 0.162" x 3-1/2" nails into the joist with no load reduction. When 0.148" x 3" nails are specified use 0.148" x 2-1/2" nails into the header and 0.148" x 3" nails into the joist with no load reduction.
- With 2x carrying members: when 0.162" x 3-1/2" nails are specified use 0.148" x 1-1/2" nails into the header and 0.148" x 3" nails into the joist and reduce the load to 0.64 of the table values. When 0.148" x 3" nails are specified use 0.148" x 1-1/2" nails into the header and 0.148" x 3" nails into the joist and reduce the load to 0.77 of the table values.
Specifications:
Ga. 18
W (in.) 2 9/16
H (in.) 7 1/4
B (in.) 2
Coating/Material Zinc Galvanized, G90
Packaging Qty. 1
Replacement Parts
Simpson Strong-Tie LUS310 - Galvanized Face-Mount Joist Hanger for 3x10
Product Details
The LUS is an easy-to-install economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails faster installation and the use of all common nails for the same connection.
Key Features
- Cannot be modified
- Works for a wide range of applications
- Features speed prongs used to temporarily position and secure the connector for easier and faster installation
- LUS-series hangers are tested load rated and code compliant
Finish
- Galvanized. Some products available in stainless steel or ZMAX coating. See Corrosion Information.
Installation
- Use all specified fasteners
- Joist nails must be driven at an angle through the joist or truss into the header to achieve the table loads.
- Not designed for welded or nailer applications.
- With 3x carrying members: when 0.162" x 3-1/2" nails are specified use 0.162" x 2-1/2" nails into the header and 0.162" x 3-1/2" nails into the joist with no load reduction. When 0.148" x 3" nails are specified use 0.148" x 2-1/2" nails into the header and 0.148" x 3" nails into the joist with no load reduction.
- With 2x carrying members: when 0.162" x 3-1/2" nails are specified use 0.148" x 1-1/2" nails into the header and 0.148" x 3" nails into the joist and reduce the load to 0.64 of the table values. When 0.148" x 3" nails are specified use 0.148" x 1-1/2" nails into the header and 0.148" x 3" nails into the joist and reduce the load to 0.77 of the table values.
Specifications:
Ga. 18
W (in.) 2 9/16
H (in.) 7 1/4
B (in.) 2
Coating/Material Zinc Galvanized, G90
Packaging Qty. 1
Technical Support
Simpson Strong-Tie LUS310 - Galvanized Face-Mount Joist Hanger for 3x10
Product Details
The LUS is an easy-to-install economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails faster installation and the use of all common nails for the same connection.
Key Features
- Cannot be modified
- Works for a wide range of applications
- Features speed prongs used to temporarily position and secure the connector for easier and faster installation
- LUS-series hangers are tested load rated and code compliant
Finish
- Galvanized. Some products available in stainless steel or ZMAX coating. See Corrosion Information.
Installation
- Use all specified fasteners
- Joist nails must be driven at an angle through the joist or truss into the header to achieve the table loads.
- Not designed for welded or nailer applications.
- With 3x carrying members: when 0.162" x 3-1/2" nails are specified use 0.162" x 2-1/2" nails into the header and 0.162" x 3-1/2" nails into the joist with no load reduction. When 0.148" x 3" nails are specified use 0.148" x 2-1/2" nails into the header and 0.148" x 3" nails into the joist with no load reduction.
- With 2x carrying members: when 0.162" x 3-1/2" nails are specified use 0.148" x 1-1/2" nails into the header and 0.148" x 3" nails into the joist and reduce the load to 0.64 of the table values. When 0.148" x 3" nails are specified use 0.148" x 1-1/2" nails into the header and 0.148" x 3" nails into the joist and reduce the load to 0.77 of the table values.
Specifications:
Ga. 18
W (in.) 2 9/16
H (in.) 7 1/4
B (in.) 2
Coating/Material Zinc Galvanized, G90
Packaging Qty. 1
Video

Ga.	18
W (in.)	2 9/16
H (in.)	7 1/4
B (in.)	2
Coating/Material	Zinc Galvanized, G90
Packaging Qty.	1

Simpson Strong-Tie LUS310 - Galvanized Face-Mount Joist Hanger for 3x10

Simpson Strong-Tie LUS310 - Galvanized Face-Mount Joist Hanger for 3x10

Have a Question? ASK NATE

Essential Accessories

Simpson Strong-Tie SD9112R100 - #9 x 1-1/2" SD Connector Screw 100ct

Simpson Strong-Tie SD9112R100 - #9 x 1-1/2" SD Connector Screw 100ct

Have a Question?
ASK NATE