Simpson Strong-Tie META20Z - 20-in. ZMAX Galvanized Embedded Truss Anchor

Product Details

The META provides an engineered method to attach roof trusses securely to concrete and masonry walls. This medium embedded truss anchor features staggered nail patterns to strengthen uplift resistance and can be used in pairs on single- and multi-ply trusses. The versatile META can be installed straight or field-bent around truss or rafter members.

Key Features

• Indented embedment line ensures accurate embedment depth
• Compatible with the Simpson Strong-Tie TSS and TBP8 moisture barrier plate
• Load rated for wind and seismic forces

Material

• 18 gauge

Finish

• Galvanized. Some products available in ZMAX coating. See Corrosion Information.

Installation

• Use all specified fasteners
• Embedded 4" into a 6" min. concrete beam or 8" nominal grouted block wall.
• For mislocated truss anchors which are greater than 1/8" but less than 1-1/2" from the face of the truss a shim must be provided. Shim design by truss engineer. When gap is greater than 1-1/2" abandon existing embedded truss anchor and install new anchor per designer.
• Minimum spacing of single anchors is twice the embedment depth for full load. For closer spacing see loads for double anchor installation.
• In double anchor installations install anchors with spoons facing outward and straps spaced no more than 1/8" wider than the rafter/truss width. Do not install nails where the straps overlap when wrapped over the rafter/truss.
• Straps do not need to be wrapped over the rafter/truss to achieve tabulated loads unless noted otherwise.

Specifications: