Simpson Strong-Tie SCHA1.75L-KT15 1.75 Horiz Anchor Slide Clip-Left 15ct

The SCHA connector is an ideal solution for panelized or stick-frame construction where the CFS framing anchors to the top of a concrete floor slab or the bottom of a steel beam. The connector features a wide support leg to decrease eccentricity on anchors and provide a variety of anchorage options. The included SCVS vertical slider helps to strengthen the connector for the highest tension (F₂) and compression (F₃) loads in the industry.

Key Features

• Provides a full 1" of both upward and downward movement
• Tabulated design values for anchorage help mitigate risk and provide ease of specification
• Either face of anchorage leg can be used against the support
• Accommodates standoff distances up to 4 3/4"
• Can be used with 3 5/8", 4", 6" and 8" studs
• Prepunched anchor holes accommodate 1/4"-diameter Titen HD^® or other 1/4"-diameter concrete screw anchors, and 0.157"-diameter powder-actuated fasteners such as the Simpson Strong-Tie^® PDPAT-62KP
• Prepunched anchor holes also eliminate the need for predrilling and help ensure accurate anchor placement
• US Patent 10,273,679

Material

• SCHA — 118 mil (10 ga., 33 ksi); SCVS — 97 mil (12 ga., 33 ksi)

Finish

• Galvanized (G90)

Installation

• Use all specified fasteners and anchors. Note that the smaller-diameter anchor holes are provided for PAF installation, and the larger-diameter anchor holes are for 1/4"-diameter concrete screw anchors.
• Ensure that the SCVS vertical slider is centered in the SCHA vertical slots by aligning the tic-marks adjacent to the triangle holes on the slider with the ≠ stamp on the SCHA clip.

Ordering Information

• SCHA10.75-KT15 contains (15) SCHA 10.75 connectors and (15) SCVS/97 sliders
• SCHA10.75L-KT15 contains (15) SCHA 10.75L connectors and (15) SCVS/97 sliders