Simpson Strong-Tie SULC410 - 4 x 10 Joist Hanger Skew Left Concl

Item #: SULC410

Price: $29.85

Most orders over $299
ship for free | See Details

Have a Question?
ASK NATE

Get Expert Advice or

Call 888-654-8898

Get Expert Advice or

Call 888-654-8898

Need this Product for a Specific Application?

Use our handy finder to find the exact model for your needs.

FIND MY PRODUCT

Item Description
Simpson Strong-Tie SULC410 - 4 X 10 Joist Hanger Skew Left Concl
The SURC and SURLC are 45°-skewed hangers designed to support 2x and 4x members in wood construction. These U-shaped hangers feature concealed header flanges providing cleaner visible lines in exposed conditions. These are identical except that they are skewed 45° to the right (SURC) and the left (SULC), respectively.
Key Features
- Features obround nail holes on the acute side, allowing nails to be easily installed parallel to the joist
- These hangers cannot be modified but will accommodate a 40°- to 50°-skewed joist
- A2 (acute) flange turned in to accommodate end-of-wall installation
Material
- 16 gauge
Finish
- Galvanized
Installation
- Use all specified fasteners; see General Notes.
- The joist end may be square cut or bevel cut.
- Fill all round and obround nail holes with specified fasteners to achieve table loads. Where noted, triangle holes in the joist flange may be filled for additional uplift capacity.
Specifications
Simpson Strong-Tie SULC410 - 4 X 10 Joist Hanger Skew Left Concl
The SURC and SURLC are 45°-skewed hangers designed to support 2x and 4x members in wood construction. These U-shaped hangers feature concealed header flanges providing cleaner visible lines in exposed conditions. These are identical except that they are skewed 45° to the right (SURC) and the left (SULC), respectively.
Key Features
- Features obround nail holes on the acute side, allowing nails to be easily installed parallel to the joist
- These hangers cannot be modified but will accommodate a 40°- to 50°-skewed joist
- A2 (acute) flange turned in to accommodate end-of-wall installation
Material
- 16 gauge
Finish
- Galvanized
Installation
- Use all specified fasteners; see General Notes.
- The joist end may be square cut or bevel cut.
- Fill all round and obround nail holes with specified fasteners to achieve table loads. Where noted, triangle holes in the joist flange may be filled for additional uplift capacity.

Simpson Strong-Tie SULC410 - 4 x 10 Joist Hanger Skew Left Concl

Simpson Strong-Tie SULC410 - 4 x 10 Joist Hanger Skew Left Concl

Have a Question? ASK NATE

Have a Question?
ASK NATE