Home
Shop by Brand
Simpson Strong-Tie
Connectors
Wood Construction Connectors
Truss Connectors
Simpson Strong-Tie TJC37 - 3-1/8 in x 7" Galvanized Jack Truss Connector

Simpson Strong-Tie TJC37 - 3-1/8 in x 7" Galvanized Jack Truss Connector

Item #: TJC37

MSRP: Price: $4.25

Price: with strikethrough $3.83

Retail Price:

Sale Price: Price $3.46

(You save $0.79 )

Most orders over $299
ship for free | See Details

Have a Question?
ASK NATE

Get Expert Advice or

Call 888-654-8898

Get Expert Advice or

Call 888-654-8898

Need this Product for a Specific Application?

Use our handy finder to find the exact model for your needs.

FIND MY PRODUCT

Item Description
Simpson Strong-Tie TJC37 Jack Truss Connector
Face-Mount Hangers for Plated Truss

TJC is a versatile connector for jack trusses. Adjustable from 0° to 85° (shipped with 67.5° bend). Nail hole locations allow for easy installation. Minimum nailing option on TJC37 provides faster installation and lower installed cost.
Material
- 16 ga. (54 mil)
Finish
- Galvanized (G90)
Installation
- Use all specified fasteners.
- TJC37 can be installed filling round holes only, or filling round and triangle holes for maximum values.
- To reduce the potential for splitting, install the TJC with a minimum 3/16" edge distance on the chord members.
- Position the jack truss on the inside of the bend line with the end of the jack truss flush with the bend line.
- Bend the TJC to the desired position (one bend cycle only).
- No bevel cut required.
- Attachment of TJC to the top chord requires the Designer to check connection geometry for placement on both carried and carrying chord members. See Top Chord Member Sizes table for suggested chord sizes.
- Supported jack member is a single 2x.
Specifications
Simpson Strong-Tie TJC37 Jack Truss Connector
Face-Mount Hangers for Plated Truss

TJC is a versatile connector for jack trusses. Adjustable from 0° to 85° (shipped with 67.5° bend). Nail hole locations allow for easy installation. Minimum nailing option on TJC37 provides faster installation and lower installed cost.
Material
- 16 ga. (54 mil)
Finish
- Galvanized (G90)
Installation
- Use all specified fasteners.
- TJC37 can be installed filling round holes only, or filling round and triangle holes for maximum values.
- To reduce the potential for splitting, install the TJC with a minimum 3/16" edge distance on the chord members.
- Position the jack truss on the inside of the bend line with the end of the jack truss flush with the bend line.
- Bend the TJC to the desired position (one bend cycle only).
- No bevel cut required.
- Attachment of TJC to the top chord requires the Designer to check connection geometry for placement on both carried and carrying chord members. See Top Chord Member Sizes table for suggested chord sizes.
- Supported jack member is a single 2x.

Simpson Strong-Tie TJC37 - 3-1/8 in x 7" Galvanized Jack Truss Connector

Simpson Strong-Tie TJC37 - 3-1/8 in x 7" Galvanized Jack Truss Connector

Have a Question? ASK NATE

Have a Question?
ASK NATE