Home
Simpson Strong-Tie
Anchoring Systems
Mechanical Anchors
Nailon Pin Drive Anchors
Zinc Nailon Pin Drive Anchor
Simpson Strong-Tie ZN25114B - Zinc Nailon 1/4" x 1-1/4" Bulk 1500ct

Simpson Strong-Tie ZN25114B - Zinc Nailon 1/4" x 1-1/4" Bulk 1500ct

Item #: ZN25114B

MSRP: Price: $214.63

Price: $187.54

(You save $27.09 )

Most orders over $299
ship for free | See Details

Have a Question?
ASK NATE

Get Expert Advice or

Call 888-654-8898

Get Expert Advice or

Call 888-654-8898

Need this Product for a Specific Application?

Use our handy finder to find the exact model for your needs.

FIND MY PRODUCT

Essential Accessories

Item Description
Simpson Strong-Tie ZN25114B Zinc Nailon Mushroom Head 1/4" x 1-1/4" 1500ct

Zinc Nailon anchors are low-cost, easy-to-install anchors for applications under static loads.

Key Features
- Available with carbon or stainless-steel pins
- Pin and head configuration designed to make anchor tamper-resistant
Material
- Body — Die-cast Zamac 3 alloy
- Pin — Carbon steel
Installation
1. Drill a hole in base material using a carbide drill bit the same diameter as the nominal diameter of the anchor to be installed. Drill the hole to specified embedment depth, plus 1/4" for pin extension, and blow hole clean using compressed air. Alternatively, drill the hole deep enough to accommodate embedment depth and dust from drilling.
2. Position fixture and insert Nailon anchor.
3. Tap with hammer until flush with fixture, then drive pin until flush with top of head.
Caution
- Not for use in overhead applications
- Nailon anchors are not recommended for eccentric tension (prying) loads — capacity will be greatly reduced in such applications
Specifications
Simpson Strong-Tie ZN25114B Zinc Nailon Mushroom Head 1/4" x 1-1/4" 1500ct

Zinc Nailon anchors are low-cost, easy-to-install anchors for applications under static loads.

Key Features
- Available with carbon or stainless-steel pins
- Pin and head configuration designed to make anchor tamper-resistant
Material
- Body — Die-cast Zamac 3 alloy
- Pin — Carbon steel
Installation
1. Drill a hole in base material using a carbide drill bit the same diameter as the nominal diameter of the anchor to be installed. Drill the hole to specified embedment depth, plus 1/4" for pin extension, and blow hole clean using compressed air. Alternatively, drill the hole deep enough to accommodate embedment depth and dust from drilling.
2. Position fixture and insert Nailon anchor.
3. Tap with hammer until flush with fixture, then drive pin until flush with top of head.
Caution
- Not for use in overhead applications
- Nailon anchors are not recommended for eccentric tension (prying) loads — capacity will be greatly reduced in such applications

Simpson Strong-Tie ZN25114B - Zinc Nailon 1/4" x 1-1/4" Bulk 1500ct

Simpson Strong-Tie ZN25114B - Zinc Nailon 1/4" x 1-1/4" Bulk 1500ct

Have a Question? ASK NATE

Essential Accessories

Diablo DMAPL4070 1/4" x 4" x 6" Rebar Demon SDS-Plus 4-Cutter Full Carbide Head Hammer Bit

Diablo DMAPL4070 1/4" x 4" x 6" Rebar Demon SDS-Plus 4-Cutter Full Carbide Head Hammer Bit

Have a Question?
ASK NATE