Thermal-Grip TGIP-ST-4000 - 4" Insulation Pin (Steel Stud 14–18 ga), 500ct
Designed to mechanically attach rigid insulation to 14–18 gauge steel studs using gas-actuated insulation fasteners—no screws or adhesives required.
ANCHOR LENGTH = INSULATION THICKNESS
The Thermal-Grip® Insulation Pin is a large 2.25" diameter washer head fastener with pins available in lengths from 1" to 6". Use with Thermal-Grip IP Insulation Fastening Tools for rapid attachment.
Steel Stud Applications
- Permanently attaches insulation with a flush finish
- For use attaching rigid insulation including XPS, EPS, polyisocyanurate, and mineral wool
Material Specifications
- Pin: Galvanized carbon steel
- Washer: Polypropylene
Application: Use with the IP40D or IP50D tool. The IP40D installs pins 1"–4". The IP50D installs pins 1"–6".
Washer: 2-1/4" (57 mm) diameter, solid plastic, to reduce thermal bridging.
Product Specifications
| Application | Steel Stud (14–18 ga) |
| Anchor Length | 4" |
| Washer Diameter | 2.25" |
| Package Quantity | 500 pcs |
| Average Pin Pull Out Values | - IP40D (Steel Stud): 18 ga = 337 lb; 16 ga = 571 lb.
- IP50D (Steel Stud): 18 ga = 393 lb; 16 ga = 527 lb; 14 ga = 745 lb; 12 ga = 963 lb. 20 ga studs: Not recommended.
|
