Thermal-Grip TGIP6000 - 6" Insulation Pin (Concrete/CMU), 250ct
Designed to mechanically attach rigid insulation to concrete, masonry, tilt-up/precast walls, and CMU using gas-actuated insulation fasteners—no screws or adhesives required.
ANCHOR LENGTH = INSULATION THICKNESS
The Thermal-Grip® Insulation Pin is a large 2.25" diameter washer head fastener with pins available in lengths from 1" to 6". Use with Thermal-Grip IP Insulation Fastening Tools for rapid attachment.
Concrete/CMU Applications
- Permanently attaches insulation with a flush finish
- For use attaching rigid insulation including XPS, EPS, polyisocyanurate, and mineral wool
Material Specifications
- Pin: Galvanized carbon steel
- Washer: Polypropylene
Application: Use with the IP50D tool (required for 5" and 6" pins). The IP50D tool can install pins from 1"–6".
Washer: 2-1/4" (57 mm) diameter, solid plastic, to reduce thermal bridging.
Product Specifications
| Application |
Concrete / CMU |
| Anchor Length |
6" |
| Washer Diameter |
2.25" |
| Package Quantity |
250 pcs |
| Average Pin Pull Out Values |
- IP40D (Concrete): 4000 PSI = 442.2 lb; 5000 PSI = 624.7 lb; 6000 PSI = 625.2 lb; CMU Block = 424.9 lb.
- IP50D (Concrete): 4000 PSI = 676.7 lb; 5000 PSI = 628.86 lb; 6000 PSI = 583.36 lb; CMU Block = Not recommended.
|