GRACO 233774 - Mechanical Fluid Pressure Regulator, 580 PSI max permanent supply pressure, 15-145 PSI Pressure Range

mechanically operated fluid pressure regulator designed primarily for use with low to medium viscosity fluids

Specifications

• Max Working Pressure: 580 psi (4000 kPa, 40 bar) maximum fluid inlet pressure
• Series: B
• Model: P10-VM
• Type: Mechanical, fluid pressure
• Regulated Pressure Range: 15-145 psi (100-1000 kPa, 1-10 bar)
• Operating Mode: M - mechanical
• Action: V - pressure regulation

Compatible Equipment

• air spray systems
• low pressure dispensing valve
• atomizing head

Related Parts

• 234273 (P10-VM npt)
• 233773 (P10-VP)
• 234272 (P10-VP npt)
• 233809 (P10-VP, OEM)
• 234256 (P10-VP, OEM npt)
• 233757 - Mechanical Fluid Pressure Regulator, 580 PSI max inlet pressure, 15-290 PSI Pressure Range
• 233759 - Pressure Regulator, P50-Vm, 1015 PSI (7000 Kpa
• 234263 - Low Pressure Fluid Regulator, 580 Max psi, 15-290 psi Range, 7.0 GPM, SST, Spring Type, 3/8 (f) x 3/8 (f), 1/8 in BSPP Port
• 234267 - Low Pressure Fluid Regulator, 1015 Max psi, 145-725 psi Range, 9.8 GPM, SST, Spring Type, 3/8 (f) x 3/8 (f), 1/8 in BSPP Port
• 234273 - Low Pressure Fluid Regulator, 580 Max psi, 15-145 psi Range, 7.0 GPM, SST, Spring Type, 3/8 (f) x 3/8 (f), 1/8 in BSPP Port

Kit Contents

• ---- - HOUSING, lower, for 233774
• 245368 - SEAT, valve
• 15Y036 - O-RING
• 15Y035 - O-RING
• 117106 - BALL, 6 mm, carbide
• 15A205 - SUPPORT, ball
• 117090 - SPRING, compression
• 15A144 - COVER
• 117123 - SCREW, fhms, M4x10
• 15A219 - RING, for non-npt models
• 117101 - PLUG, threaded
• 117085 - SEAL, ring
• 117099 - PLUG, threaded
• 245372 - PLUNGER, valve
• 15A179 - DIAPHRAGM

Part of the P10 series fluid pressure regulators. Series B model. Based on model designation key: P10 = 10 bar pressure regulation max, V = pressure regulation action, M = mechanical operating mode. Part of a family of mechanically operated fluid pressure regulators. Used in air spray systems to ensure accurate, positive control of fluid pressure. Installed at circulating line take-off or pump to reduce main line pressure. This is part of a family of mechanical fluid pressure regulators. Specific torque requirements noted: some components require medium-strength thread locker and various torque specifications ranging from 2-5 Nm depending on the component.

Reference Manuals

• 309474 (Page 2) Low Pressure Fluid Regulators