Baleigh 1004703 Horizontal Press Brake HPB-45NC
This Baileigh horizontal press brake machine can bend, punch, and shear with the right tooling. You can easily make small parts, like flanges and brackets, because material lies on a flat surface.
- 5 hp motor produces up to 45 tons of pressure.
- 9.84” stroke length.
- Runs on 220-volt 3-phase power.
- Industrial-grade hydraulic system is located on top of the metal press brake to reduce flex.
- You can adjust the pressure of the the hydraulics for your material.
- Designed for simple operation. In 15 minutes, anyone could learn to run it.
- Numerical control (NC) programmer can store up to 50 programs with 10 bends per program.
- Electronic encoders make this hydraulic press brake accurate to +/- .002”.
- Product counter makes production runs more efficient.
- Control the bending stroke with 2 buttons or with the foot pedal, so your hands are free to guide the material.
- You can also run the metal press brake in a manual mode for one-off projects as well as set-up.
- Robust manual back gauge bolts to the machine and helps with repeatability.
- Machined table, 36” high, keeps your material perfectly level. No need to hold one side and hope it’s lined up!
- Quick-release tooling system makes changes fast and simple. Just turn the handle and the post will lift. The V die slides in and out.
- Accepts attachments for punching, straightening, shearing, and even pipe bending.
- Includes 80mm single-V tooling (V-opening die and V post).
- Many additional tooling sets are available. We can find the right one for your project or create a custom set, if necessary.
- 2,266-pound steel frame, made from 4 powerful pieces of inch-thick flat bar, will keep results accurate for many years and won’t flinch under pressure.
- Shelving in the front can hold tooling and items you might need on a daily basis.
- We stock replacement parts, so we can ship them to you quickly.
- This Baileigh horizontal press is covered by a 1-year parts warranty.
- Our team of service reps, all with hands-in machine experience, are here to provide lifetime technical support by phone.
Also available in a 78-ton industrial hydraulic press brake.
Recommended for:
- Full industrial production, including shipbuilding yards, boiler manufacturers, nuclear applications.
- Making parts that are thick, but not wide (die size is limited).
Specifications:
Item Number | HPB-45NC |
---|
Return Speed | .78" / sec. |
---|
Motor | 5 hp |
---|
Pressure | 45 tons |
---|
Punch Height | 7.875" |
---|
Working Speed | .51" / sec. |
---|
Stroke Accuracy | +/– .002" |
---|
Stroke Length | 9.84" |
---|
Table Height | 36.61" |
---|
Approach Speed | 1.5" / sec. |
---|
Fixture Holes | (1) @ 3.268" dia. / (3) @ 2.283" dia. |
---|
Power | 220V / 3-phase |
---|
Shipping Weight | 2270lbs |
---|
Shipping Dimensions (Inches) | 60x48x55 |
---|