Baleigh 1230392 MSS-18DT - Deep Throat Shrinker Stretcher
Every shop needs a shrinker stretcher at one time or another, but all of the economical ones on the market suffer from the same issue, throat depth. Baileigh decided to take a look at that problem and tackle it head on. Presenting the MSS-18DT deep throat shrinker stretcher. This little workhorse feature a 2.5" throat depth instead of the industry standard 1.5". Whats better it comes with 2-heads to save time. No need to switch jaws!
- 18 gauge mild steel and 16 gauge aluminum capacity.
- 2.5” throat provides that little extra depth for even more versatlitylets you work on the edges of panels.
- Comes assembled with shrinker and stretcher jaws—everything you need to get started.
- Jaws are in separate iron housings, so you don’t have to change tooling between functions.
- Heavy cast iron construction allows the shrinker stretcher to reliably work at full capacity over many years of use.
- Covered by a 1-year parts warranty and lifetime technical supportby phone.
- We keep replacement jaws and other parts in stock, so we can ship them to you quickly.
Recommended for: Entry-level sheet metal shaping, especially in automotive and airplane shops.
Note: Square corner jaws on this model can leave small indents that require additional smoothing. For a shrinker stretcher without square corner jaws, check out the MSS-16F.
Specifications:
| Item Number | MSS-18DT |
|---|
| Construction | Cast Iron Bodies |
|---|
| Mild Steel Capacity | 18 ga. |
|---|
| Throat Depth | 2.5" |
|---|
| Stand | Optional |
|---|
| Aluminum Capacity | 16 ga. |
|---|
| Power | Manual |
|---|
| Shipping Weight | 25lbs |
|---|
| Shipping Dimensions (Inches) | 44x19x8 |
|---|
